Automatic drilling and additive FL 10 machine

Automatic drilling and additive FL 10 machine
Quantity of supports: 10 pieces, Total of spindles: 218 pieces.

APPOINTMENT:

The drilling and additive machine of type through passage is intended for drilling for one pass of through and deaf openings under shkant, a coupler core in end faces of details and openings under accessories in layer in details of cabinet furniture. Work of the machine is carried out in the automatic mode.

SCHEME OF PROCESSING:

SCOPE:

It is applied to processing of necessary assembly openings in details of cabinet furniture at the enterprises and in shops on a large-lot production of furniture, and also other woodworking productions.

SECURITY SYSTEM

All knots and units meet standards of SE. On all moving knots and mechanisms protective protections for prevention of traumatism are established.

 -

DESIGN FEATURES

 - - - - - - - - - - - - - - - - - - - - - - - - - - SYSTEM of GIVING System of automatic giving of panel board preparations in a processing zone with the pneumatic closer in two planes. Provides high precision and reliability of basing of preparations and high precision of processing of openings. Protects edges of preparations from chips and hollows.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the DEVICE of AUTOMATIC GIVING of PREPARATION the Device is equipped with driving belts by means of which preparation moves in a processing zone.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the PNEUMATIC CLOSER Is intended for giving of a detail in a processing zone. The system of clips and a horizontal emphasis rigidly fix a detail that provides the accuracy of additive of openings.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - DIGITAL Datchikielektronny digital sensors of movement of vertical drilling supports with an accuracy of counting of the size of 0,1 mm. Provide high precision of the established sizes at control on width and, respectively, high precision of processing, reduction of time of readjustment and convenience of service.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - DRILLING SUPPORTS Drilling supports can quickly and precisely be recustomized by situation depending on the card of additive, and also have function of turn on 90 ° - with pneumofixing. Thanks to quantity of drilling supports and their fast change-over the machine of type through passage is easily built in the technological line and, respectively, to be applied at the enterprises with a mass production.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - DRILLING SUPPORTS the TOP Vertical drilling supports located from above allow to process even the most difficult card of additive.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the CONTROL PANEL the Panel of the control panel differs in convenience and ergonomics and provides convenience of work and setup of the machine. Work on the machine does not demand from the operator of high qualification.

 -

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - ELECTRIC MOTORS Unattended CEG electric motors (Italy) ensure reliable functioning of the machine and a big resource of work.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the RECEIVER Provides stability of work of pneumatics at an intensive use of the machine that positively affects constancy of speed of giving drilling traverses and increases machine productivity in general.

 -

 - - -

Technical characteristics
The sizes of the processed details, mm: - - - width, the smallest - - - the greatest - - - thickness, the greatest	310 3500 60
Distance between vertical drilling supports, mm: - - - the smallest - - - the greatest	170 3400
Depth of vertical drilling, the greatest, mm	60
Depth of horizontal drilling, the greatest, mm	40
Quantity of drilling supports, piece: - - - horizontal (left and right) - - - vertical	2 2 x 3 = 6 from above 2 x 5 =10 from below
Quantity of spindles on supports, piece, - - - horizontal left - - - horizontal the right - - - vertical	21 21 11 x 6=66 11х10=110
Total of vertical spindles, piece.	179
Total of spindles, piece.	218
Distance between centers spindles, mm	32
Frequency of rotation of drilling spindles, rpm	2800
Power of the electric motor of a vertical spindle, kW	2,2х5=11
Power of the electric motor of a vertical spindle, kW	2,2х3=6,6
Power of the electric motor of a horizontal spindle, kW	1,85х2=3,7
Speed of giving, m/min	60
Power of the electric motor of giving, kW	0,37
General rated capacity, kW	22,04
Height of a desktop, mm	915
Need for compressed air, l/cycle	125
Overall dimensions, mm: - - - length - - - width - - - height	5535 1980 2200
Weight, kg	4500

 -

 - - - -

Technical characteristics
The sizes of the processed details, mm: - - - width, the smallest - - - the greatest - - - thickness, the greatest	310 3500 60
Distance between vertical drilling supports, mm: - - - the smallest - - - the greatest	170 3400
Depth of vertical drilling, the greatest, mm	60
Depth of horizontal drilling, the greatest, mm	40
Quantity of drilling supports, piece: - - - horizontal (left and right) - - - vertical	2 2 x 3 = 6 from above 2 x 5 =10 from below
Quantity of spindles on supports, piece, - - - horizontal left - - - horizontal the right - - - vertical	21 21 11 x 6=66 11х10=110
Total of vertical spindles, piece.	179
Total of spindles, piece.	218
Distance between centers spindles, mm	32
Frequency of rotation of drilling spindles, rpm	2800
Power of the electric motor of a vertical spindle, kW	2,2х5=11
Power of the electric motor of a vertical spindle, kW	2,2х3=6,6
Power of the electric motor of a horizontal spindle, kW	1,85х2=3,7
Speed of giving, m/min	60
Power of the electric motor of giving, kW	0,37
General rated capacity, kW	22,04
Height of a desktop, mm	915
Need for compressed air, l/cycle	125
Overall dimensions, mm: - - - length - - - width - - - height	5535 1980 2200
Weight, kg	4500

 -

 -

 -