- Country of manufactureItaly
[? preparations at 0 °: krug255 mm square of 255 mm rectangles 300х180 mm]
The automatic lentochnopilny BS 300/60 machine - AFI-E
The machine automatic lentochnopilny BS 300/60 - AFI-E is intended for cutting of continuous preparations and metal profiles in the conditions of a mass and large-lot production. The machine has an electronic control system and autodiagnostics. The system allows to trace in operating time such parameters as: speed of rotation of a saw, quantity of cuts, cutting cycle time, etc.
The automatic cycle of work includes: a material clip, giving and cutting, return of the tool and an extraction, supply of material for new pieces. The operator needs to set cutting parameters, a frame angle of rotation if cutting at an angle, length of the cut-off preparation and the number of preparations is necessary. Subsequently it needs to insert the following bar only.
The machine differs from the analogs in high efficiency and quality of a detachable surface, reliability and durability, simplicity of installation and operation, with a minimum cost of one cut, low energy consumption, metalsaving, high durability, vibration resistance and accuracy of work.
|Saw angle of rotation in a car the mode||from 0 ° - to 45 ° - to the left|
|Saw angle of rotation in a semi-bus the mode||from 0 ° - to 60 ° - to the left|
|Diameter of preparation of a round form at 0 ° - mm||255|
|The party of preparation of square shape at 0 ° - mm||255|
|The amount of squared preparation at 0 ° - mm||300х180|
|Speeds of the movement of a tape, m/min||35 - 70|
|Sizes of a saw, mm||2770х27х0,9|
|Network tension, In||380|