Beaming machine SLD-4P-1000M
- Customer pickup,
- In detail
Beveling machine SLD - 4P - 1000 with frequency converter
The four - saw canter (saw - 1000 mm) is designed for processing logs into a two - edged beam and an unedged board (22 - 25 mm).
Machine SLD - 4P - 1000 is distinguished by: a reinforced frame structure, fast self - sufficiency, many options for completing any near - machine mechanization, excellent performance of the canter, compliance with safety rules, use of the canter first in the stream, reliability and ease of operation.
This canting (monitor) machine is available or the order production time is 5 working days.
Modification of the machine under the customer's sizes is possible. Negotiated individually.
The carriage (cantering) machine is equipped with 4 saws, which makes it possible to obtain one carriage and two unedged boards from a log in one pass. This woodworking equipment can be used alone or as a first row sawmill in a woodworking line.
On the fire monitor SLD - 4P - 1000, 4 saws with a diameter of 1000 mm, respectively, must be installed. This allows you to cut logs with a diameter of up to 360 mm and get a two - edged beam with a thickness of up to 250 mm at the output.
The feed rate of the material is continuously adjustable. Depending on the load on the saws, according to the readings of the ammeter, the optimal feed rate is set. This allows you to achieve such an operating mode in which the electric motor and saws work without overload in the optimal mode. As a result, the service life of the saws is extended and maintenance costs are reduced.
|Type of supply current||variable three - phase
|Current frequency, Hz||fifty|
|Used voltage, V||380|
|Width of processed material:
|Thickness of processed material:
|Processed material length:
|Cutting speed, m/s||75|
|Feed rate with frequency converter, m/min||0 - 20|
|Number of saws, pcs. , no more||four|
|Distance between edge saws, mm, no more||250
|Saw diameter, mm, maximum||1000
|Nominal diameter of the seat neck for the cutting tool, mm||fifty|
|Nominal distance from the floor to the working surface of the table, mm||800|
|Service rate, people||2|
|Worm gear||Ch - 80 - 40 - 51 - U2|
|Number of electric motors, pcs.||3|
|Electric motor of the main drive (saw shaft) rated power, kW||22 (2 pieces)
|Rated speed, arr. /min||2850|
|Chain feed drive electric motor: rated power, kW||0.55|
|Rated speed, rpm||915
|Total power of electric motors, kW||44, 55|
|Machine weight, kg, no more||1300|
|Overall dimensions, mm, not more than: