Currency KZT
Beveling machine SB-4P-700 (45 kW) with frequency converter buy in Almaty
Buy Beveling machine SB-4P-700 (45 kW) with frequency converter
Beveling machine SB-4P-700 (45 kW) with frequency converter

Beveling machine SB-4P-700 (45 kW) with frequency converter

In stock
Reconfirm the price with seller
Shipping:
Seller
Kazakhstan, Almaty
(View map)
Description

Advantages of the machine SB - 4P - 700

  1. The frame of the machine is made with a significant margin of safety, vibrations and any deformations are completely excluded.
  2. The main saw shaft has three full - fledged reliable attachment points. This design ensures its permanently stable and precise position, which guarantees a high surface quality and a good geometry of the finished product.
  3. Continuously adjustable feed speed allows sawing in optimal conditions under various conditions, such as the diameter of the raw material, the number of saws, the hardness of the rock, frostbite, while maintaining high productivity.
  4. High degree of individualization of the machine. Thanks to a large number of different options, each customer can complete a machine that will be most suitable for solving his particular tasks.
  5. Reliable protection mechanisms: curtains at the entrance to prevent the departure of the slab, curtains at the exit to prevent the departure of sawdust. - 2 or 4 saws, 700 mm in diameter;

- engine power 45 kW;

- smooth adjustment of feed rate;

Appointment of the disk canting machine SB - 4P - 700

SB - 4P - 700 disc cantering (cantering) machine is designed for sawing round wood in line mode into a carriage and an unedged board.

Cantering machine SB - 4P - 700 can be equipped with saws with a diameter of 700 mm.

The machine, depending on the power of the installed engine, allows processing from 35 to 150 or more m3 of sawlog per shift and is the basis of a high - performance line for the production of sawn timber from thin wood.

The principle of operation of the machine SB - 4P - 700

The SB - 4P - 700 disk canting machine belongs to the through - type machines, i. e. during processing, the workpiece moves, and the processing unit itself is stationary. The log is fed into the saw unit using a chain feed. In the basic configuration, the canted gang saw is equipped with a system for continuously adjusting the feed rate from the operator's console, which allows you to select the optimal sawing speed depending on various conditions, such as log diameter, rock hardness, frost penetration, etc.

Sawing is performed by two or four saws located on one shaft. The distance between saws is regulated by separations of various widths. When sawing with two saws, the output is a carriage (double - edged timber) and two slabs. If four saws are installed on the machine in one pass, a carriage is obtained from a log, two slabs (unedged) boards and a slab on both sides.

The riving knives located behind the saws hold the carriage and prevent rubbing and overheating of the saws.

Advantages of the machine SB - 4P - 700

  1. The frame of the machine is made with a significant margin of safety, vibrations and any deformations are completely excluded.
  2. The main saw shaft has three full - fledged reliable attachment points. This design ensures its permanently stable and precise position, which guarantees a high surface quality and a good geometry of the finished product.
  3. Плавно регулируемая скорость подачи позволяет осуществлять пиление в оптимальных режимах при различных условиях, таких как диаметр сырья, количество пил, твердость породы, промороженность, сохраняя при этом высокую производительность.
  4. Высокая степень индивидуализации станка. Благодаря большому количеству различных опций каждый заказчик может скомплектовать себе станок, который будет максимально подходит для решения именно его задач.
  5. Надежные механизмы защиты: шторки на входе для предотвращения вылета горбыля, шторки на выходе для предотвращения вылета опила.

Наименование параметров

Значение

1. Длина распиливаемых бревен мм.

 

Максимальная длина

6500

Минимальная длина

1500

2. Минимальный диаметр распиливаемых бревен в вершине, мм

100

3. Максимальный диаметр распиливаемых бревен в комле (при центральной разлучке 100/120/150 мм), мм

250/255/265

4. Толщина получаемого бруса, мм, в пределах

80…150

5. Номинальная частота вращения пильного вала, об/мин.

2000

6. Количество пильных дисков, шт.

4 - 2

7. Диаметр пил, мм, наибольший

710

8. Рекомендуемые пилы WoodCraft

700х50х4,0/6,0(18z + 18) + 6

9. Толщина пропила, мм

зависит от пил, обычно 6 - 8

Расстояние между внутренними пилами, мм

75 - 150

10. Скорость вращения пил, об/мин

2000

11.Тип подачи

конвейерный

12. Скорость подачи, м/мин.

3 - 10

13. Габаритные размеры пильной каретки

 

длина

2000

ширина

900

высота

1350

14. Габаритные размеры приемных столов (в сборе)

 

длина

5000

ширина

500

высота

950

15. Габаритные размеры подающих столов (в сборе)

 

длина

7200

ширина

800

высота

950

16. Масса станка (в сборе)

1300

 

Contact the seller
Beveling machine SB-4P-700 (45 kW) with frequency converter
Beveling machine SB-4P-700 (45 kW) with frequency converter
Shipping method
Compare0
ClearSelected items: 0