Currency KZT
Brick ceramic one-and-a-half hollow M-125 buy in Nur-Sultan
Buy Brick ceramic one-and-a-half hollow M-125
Brick ceramic one-and-a-half hollow M-125

Brick ceramic one-and-a-half hollow M-125

Products from producer
In stock
45 KZT
  • Cash,
  • Invoice payment,
  • Visa/Mastercard
  • In detail
Kazakhstan, Nur-Sultan
(View map)
Technical characteristics
  • BrandМиновский кирпичный завод
  • Country of manufactureKazakhstan
  • Type of brickCeramic
  • Purpose of brickCommon
  • Brick sizeSesquialteral
  • The presence of voidsHollow
  • Brick gradeM125

 The brick is one-and-a-half ceramic

The brick is construction, it ordinary, last full cycle of roasting, is applied to an internal and external laying with need of the subsequent plaster ― as has quite rough, rough surface with the allowed splitting off to 1 cm.
      The ordinary brick bears on itself the main loading at construction and operation of the bases and socles of buildings, and also the bearing partitions and bearing walls. Here the corpulent type of an ordinary brick ― with the density over 1600 kg/cm ³ is applied it can maintain very high loadings decades without essential changes of the characteristics which are defined in GOST 530-2007.
      Its frost resistance and level of water absorption directly depends on density of a brick and its durability.


 The corpulent ceramic construction brick should not have more than 13% of volume of emptiness. Heat conductivity of this type of a brick rather high: 0,6-0,7 W/m With ° and therefore walls from a corpulent construction brick are subject to obligatory warming. The hollow construction brick has the total amount of emptiness from 13% to 45% and its density does not exceed 1600 kg/cm ³.
   The ordinary brick, as well as other types of brick products, can be the different size:
Unary 250*120*65mm constructions socle the room, the bases etc. is applied to a construction of internal partitions.
One-and-a-half 250*120*88mm ― for construction of bearing walls of small number of storeys and internal partitions.
Double brick 250*120*138mm - for the bearing walls experiencing high strain.
    From a construction (private) brick it is worth allocating separately a brick brick and the brick made by way of moist pressing which underwent incomplete roasting or only thermal drying. The main difference of a moist way of formation of a brick from lamellar, also its advantage ― is an opportunity to make a product from low-lamellar clays humidity of 8-12% that significantly accelerates process of drying after pressing it from two parties. And it allows to achieve the accuracy of the sizes and clearness of corners.

1 ― width is 120 mm
2 ― length is 250 mm
3 ― thickness is 65 mm, 88 mm, 138 mm
4 ― a lozhok ― the greatest side located perpendicular to a bed
5 ― a bed ― the working side located parallel to the laying basis
6 ― a poke ― the smallest side located perpendicular to a bed
The main
Country producer Kazakhstan
Type of a brick Ceramic
Purpose of a brick   Private
Color  Beige
Brick size   One-and-a-half
Surface Smooth
Brick type Hollow
Brick brand   M-125
Frost resistance   F50
Water absorption   16.0 (%)
Contact the seller
Brick ceramic one-and-a-half hollow M-125
Brick ceramic one-and-a-half hollow M-125
Shipping method
Payment method
ClearSelected items: 0