Currency KZT
Brozex KC-11 STANDARD buy in Karaganda
Buy Brozex KC-11 STANDARD
Brozex KC-11 STANDARD

Brozex KC-11 STANDARD

In stock
Price:
1430 KZT
Wholesale:
  • 1230 KZT/pkg  - from 100 pkg
Shipping:
Seller
Kazakhstan, Karaganda
(View map)
Technical characteristics
  • BrandBrozex
  • Country of manufactureRussia
Description

Description of goods

WEIGHT: 25 kg

PALLET: 48 pieces.

BROZEX KS-11 STANDARD

Mix for laying of a ceramic tile and porcelain tile. For external and internal works.

STRUCTURE:

Cement, natural mineral fillers, polymeric additives.

PROPERTIES:

Durability, moisture resistance, resistance to slipping on vertical surfaces, profitability and convenience in application, thickness of the gluing layer of 2-10 mm.

MISSION:

BROZEX KS-11 the STANDARD is applied to laying of a ceramic facing tile on the concrete, brick, stone and plastered surfaces of walls and floors in dry and damp rooms. During the external works it is used for facing of floors by a ceramic tile and porcelain tile on balconies and terraces. Glue is suitable for a laying of blocks from cellular concrete. It is possible to use for porcelain tile fixing (400mm*400mm) with water absorption not less than 3%.

PREPARATION OF THE BASIS:

The basis has to be the solid, dry, strong, cleared of dust, old paint, oil spots and other coverings worsening coupling with a surface. Roughnesses, cracks and other defects of walls need to be leveled the plaster mixes BROZEX. For alignment of the bases of floors to use the special mix BROZEX NP-41.

TEMPERATURE CONDITION:

In the course of work and during the next 2 days temperature of a basis has to be in the range from +5 °C to +30 °C.

METHOD OF APPLICATION:

Dry mix to mix with clear water with the temperature of 15-18 °C in the ratio 0,2-0,24 l of water on 1 kg of mix (5,0-6,0 l on a bag of 25 kg) before receiving homogeneous mass without lumps, to allow to be stood within 10 minutes and to mix again. Excess of water leads to decrease in strength characteristics of solution!
To apply the received solution with a thin layer by means of a shovel. Then to level the gear pallet. Teeth of the pallet have to have square shape and correspond to the sizes of tiles (at the sizes of tiles of 15х15 cm teeth – 6 mm., at the sizes of tiles of 30х30 cm – 8 mm.). Tiles should be laid within 10-15 minutes after a basis covering solution. Previously not to presoak a tile! It is not recommended to stack tiles "end-to-end". Width of a seam has to be not less than 2 mm. Seams when laying a tile have to remain free. For convenience it is necessary to use crosses. To remove surplus of rastvorny mix. The prepared solution can be used within 4 hours.

ZATIRKA OF SEAMS:

To fill seams between tiles with the special rasshivochny mixes BROZEX EDGINGS. To carry out works not earlier than in 48 hours after laying of a tile.

PRECAUTIONARY MEASURES:

Mix contains cement therefore works need to be carried out in rubber gloves. To apply a respirator or a gauze bandage to protection of airways. At hit in eyes immediately to wash out a large amount of water.

STORAGE:

Warranty period of storage of 12 months from the date of production. To store in dry rooms on pallets in the intact company packing.

TECHNICAL CHARACTERISTICS:

Consumption of dry mix of 2,0-5,0 kg/sq.m.

Water consumption on 1 kg. dry mix of 0,20-0,24 l/kg

Open time of 15 min.

Usage time of the prepared solution of 4 h.

Durability of coupling of solution with the basis, 28 days of 0,8 MPas

Strength of solution at compression, 28 days of 10 MPas

The maximum size of particles is 0,63 mm

Frost resistance of F50

GOST 31357-2007.

Contact the seller
Brozex KC-11 STANDARD
Brozex KC-11 STANDARD
Shipping method
Compare0
ClearSelected items: 0