Cellular polycarbonate sheet INROOF

Cellular polycarbonate sheet INROOF
The cellular polycarbonate sheet INROOF represents the transparent corrugated sheet which is interfaced with roofing three-layer a sandwich panel of "TSP-K MT" on width and length, made of cellular polycarbonate (production Italy) for use as translucent inserts (antiaircraft lamps) in roofing designs from three-layer a sandwich panels.
The cellular polycarbonate sheet INROOF is the ideal solution of natural lighting. In the presence of translucent inserts of 7-15% of the area of a roof they can replace completely electric lighting in the afternoon. The special structure of cellular polycarbonate has excellent indicators zvuko-and thermal insulations and on the properties is equivalent to a double-glazed window with a double glazing.
the drawing - on - sayt.jpg
Working width of sheets — 1000 mm
thickness of sheets — 10 mm
the producer — Italy
color — transparent (colourless)
Permissible load
Loading
with a width of light rate up to 1 m with a width of light rate more than 1 m
(kg/sq.m)
(in one row) (in two and more rows)


Tablitsa1.Jpg

Tablitsa2.Jpg



The maximum distance between support (mm)
30
3380 3750 3150 3500
60
2480 2750 2120 2350
90
2180 2350 1710 1900
120
1800 2000 1440 1600
150
1580 1750 1220 1350
180
1400 1550 990 1100
210
1260 1400 770 850
240
1080 1200 540 600
270
950 1050 360 400
300
810 900 180 200
330
630 700 - -
360
540 600 - -
Advantages of cellular INROOF polycarbonate:
transparency of 59%;
the sandwich panels is ideally combined with roofing three-layer, providing easy joining of profiles, both on length, and on width;
the maximum distance between support to 3,5m;
at the expense of cellular structure there is no condensate problem;
high durability of material;
protection against UV rays from outer side;
coefficient of a heat transfer of 2,50 W / м2С that corresponds to a double double-glazed window.
Polycarbonate-for-sayta.jpg
Advantage of translucent inserts from cellular INROOF polycarbonate in a roof before antiaircraft lamps consists in absence on a roof of a difficult design - the basic part placed on beams or plates and domes that allows not to make heavier a roofing design and also to avoid leakages and condensate in use.
Zenitnye-fonari.jpg Polikarbonatnaya-vstavka.jpg
Antiaircraft lamp
Translucent insert from cellular polycarbonate

In industrial, commercial and civil engineering cellular INROOF polycarbonate is used for the organization of natural lighting in a roof at the industrial enterprises, objects of agricultural and livestock purpose, warehouses, the covered markets, car centers, etc.:
INROOF1.jpg polycarbonate INROOF2.jpg polycarbonate INROOF3.jpg polycarbonate
INROOF4.jpg polycarbonate INROOF5.jpg polycarbonate INROOF6.jpg polycarbonate
Montazh1.Jpg
cellular-polik5.jpg cellular-polik6.jpg
Montazh2.Jpg

For more reliable and waterproof fastening of polycarbonate sheets, and also in order to avoid polycarbonate breakdown by the self-tapping screw it is necessary to use in the place of fastening the special equestrian.
Poles 4.png montazh6.jpg
Polycarbonate has by 3 times bigger coefficient of thermal expansion, than steel therefore fastening of polycarbonate is carried out with a gap, i.e. in the place of fastening in a polycarbonate leaf the opening of 8 mm is bored through previously, and the self-tapping screw is installed in its middle (with a gap from all directions).
Fastening in run on an eaves sves, and also in places of an overlap of sheets on length is made in each top of a wave of a leaf with obligatory sealing of joints.
Fastening on a slope is made in wave top with a step no more than 300 mm.
In order to avoid hit of dust and moisture in cellular polycarbonate, sheets are delivered with the soldered end faces. In case of a cut of sheets on parts, open end faces have to be surely stuck specially with a tape.
Working width of sheets — 1000 mm
thickness of sheets — 10 mm
the producer — Italy
color — transparent (colourless)
Advantages of cellular INROOF polycarbonate:
transparency of 59%;
the sandwich panels is ideally combined with roofing three-layer, providing easy joining of profiles, both on length, and on width;
the maximum distance between support to 3,5m;
at the expense of cellular structure there is no condensate problem;
high durability of material;
protection against UV rays from outer side;
coefficient of a heat transfer of 2,50 W / м2С that corresponds to a double double-glazed window.
Advantage of translucent inserts from cellular INROOF polycarbonate in a roof before antiaircraft lamps consists in absence on a roof of a difficult design - the basic part placed on beams or plates and domes that allows not to make heavier a roofing design and also to avoid leakages and condensate in use.