Centrifuge Spd-12 PLASMA for plazmoliftinga

Centrifuge Spd - 12 PLASMA for plazmoliftinga - portable installation periodic action, Board, with digital control system, allows sharing of heterogeneous liquid density up to 2 g/cm3 at fractions by centrifugal (max value factor Division - 3500). Scope - cosmetology (plazmoliftinga), dentistry (plazmodenta). At the same time the rotor can be fitted up to 6 tubes (8.5/10 ml)

This model provides for the possibility of the rotating speed of the rotors step from 500 rpm to 6000 RPM (increment 100 rpm); opening hours (programmable, 0 - 99 m with steps of 1 min auto switch - off mode, the actuator).

By default, the device is installed, the preferred mode of operation: Acceleration up to 3300 RPM - 20 sec, centrifugation at these revs - 5 min, braking time - 40 sec.

Specifications:

• - Powered centrifuge from AC:
• voltage 220 v,
• frequency 50 Hz.
• - Engine power 90 W.
• - Overall dimensions, mm, not more: .
• length 270 mm;
• width: 250 mm;
• height 260 mm.
• - Weight of not more than 15 kg centrifuges.
• - Tube angle 35° to the axis of rotation.
• - Volume centrifuges, max - 60 ml

The kit includes rotor RU6h10M.

In the centrifuge rotor load is incomplete is provided subject to installation tubes capacity in diametrically opposite pockets rotor (respectively 2, 4 or 3 tubes tubes of the same capacity, balanced and installed through 120°).