Ceresit CR 166. Elastic waterproofing weigh

Scope

The waterproofing mass of CR 166 is intended for the device of elastic waterproofing coverings on not salted mineral the bases which are not containing plaster, including subject to deformations, in and outside of buildings.

It can be applied:

• for a waterproofing of the bases, hydraulic engineering constructions, terraces, balconies, elements of the buildings which are lower than the level of the earth, etc.;

• for a waterproofing of bathtubs of outdoor and indoor pools and tanks for water of economic and drinking appointment up to 50 m in depth;

• for protection of concrete and reinforced concrete constructions against carbonization (on piers, retaining walls, tunnels, bridges, coolers, support, etc.).

Has high chemical resistance to alkalis, fertilizers (at pH> 4,5), to hydraulic oil, 10% solution of chloride of sodium, sodium hypochlorite, a sodium carbonate (soda), sugar, 10% solution of ammonia, acetone.

In the presence of a hydrostatic pressure the waterproofing has to work for a clip. The waterproofing covering should be protected from mechanical damages by tiled facing or the plaster or a coupler which are not containing plaster.

Properties

• vapor-permeable;

• elastic;

• frost-resistant;

• blocks cracks disclosure of 0,75 mm;

• it is steady against salt and alkaline aggression;

• it is easily put with a brush;

• it is suitable for external and internal works;

• it is ecologically safe.