- BrandKazstanex
- Country of manufactureKazakhstan
Mills: 4 mills on 4 kW the Max. width of a groove: to 210 mm network Tension: 380 V
APPOINTMENT:
The stationary quadrilateral milling machine is intended for selection of ventsovy grooves in a bar of rectangular and square section, is used in production of wooden building constructions.
Processing of a bar happens on the machine for one cycle in the semi-automatic mode, milling of cups (wreaths) by means of horizontal and vertical milling heads. Application of linear high-precision guides, for movement of milling supports, provides high precision and quality of processing.
SCHEME OF PROCESSING
-
-
THE RECEIVED PRODUCTS
-
-
-
| Technical characteristics: | |||||||||
|
The sizes of the processed bar B x H, mm: - - - minimum (option) - - - maximum |
100x100 (80x35) 250х270 |
||||||||
|
Length of the processed bar, mm: - - - minimum - - - maximum |
900 it is not limited |
||||||||
|
Depth of the milled grooves maximum, mm: - - - vertical - - - horizontal |
25 67,5 |
||||||||
|
Width of grooves minimum/maximum (processed for one pass), mm: - - - vertical - - - horizontal |
10 / 210 10/210 |
||||||||
|
Quantity of milling heads, piece: - - - vertical - - - horizontal |
2 2 |
||||||||
|
Landing diameter of the tool, mm |
50 |
||||||||
|
Preparation clip |
pneumatic |
||||||||
|
Pressure of compressed air, kgf/cm2 |
7 ÷-10 |
||||||||
|
Consumption of compressed air, l/min: |
20 |
||||||||
|
Giving speed (labor movement of milling heads), m/min |
0,2 ÷-3 (pneumatic with the adjustable stabilizer of speed) |
||||||||
|
Frequency of rotation of mills, rpm |
4130 |
||||||||
|
Pressure of compressed air, MPa |
0,6 |
||||||||
|
Diameter and quantity of aspiration openings, mm/piece |
200/2 |
||||||||
|
Productivity of aspiration, m3/hour |
3500х2=7000 |
||||||||
|
Power of the drive of each milling head, kW |
4 |
||||||||
|
Rated capacity, kW |
16 |
||||||||
|
Overall dimensions (length x width x height), mm |
1760х1650х1600 |
||||||||
|
Weight, kg |
1500 |
||||||||
-
-
| Technical characteristics: | |||||||||
|
The sizes of the processed bar B x H, mm: - - - minimum (option) - - - maximum |
100x100 (80x35) 250х270 |
||||||||
|
Length of the processed bar, mm: - - - minimum - - - maximum |
900 it is not limited |
||||||||
|
Depth of the milled grooves maximum, mm: - - - vertical - - - horizontal |
25 67,5 |
||||||||
|
Width of grooves minimum/maximum (processed for one pass), mm: - - - vertical - - - horizontal |
10 / 210 10/210 |
||||||||
|
Quantity of milling heads, piece: - - - vertical - - - horizontal |
2 2 |
||||||||
|
Landing diameter of the tool, mm |
50 |
||||||||
|
Preparation clip |
pneumatic |
||||||||
|
Pressure of compressed air, kgf/cm2 |
7 ÷-10 |
||||||||
|
Consumption of compressed air, l/min: |
20 |
||||||||
|
Giving speed (labor movement of milling heads), m/min |
0,2 ÷-3 (pneumatic with the adjustable stabilizer of speed) |
||||||||
|
Frequency of rotation of mills, rpm |
4130 |
||||||||
|
Pressure of compressed air, MPa |
0,6 |
||||||||
|
Diameter and quantity of aspiration openings, mm/piece |
200/2 |
||||||||
|
Productivity of aspiration, m3/hour |
3500х2=7000 |
||||||||
|
Power of the drive of each milling head, kW |
4 |
||||||||
|
Rated capacity, kW |
16 |
||||||||
|
Overall dimensions (length x width x height), mm |
1760х1650х1600 |
||||||||
|
Weight, kg |
1500 |
||||||||
-
-
-
-