Common industrial TASh-11P, TASh-11P-S telephone se
- Customer pickup,
- Courier
- In detail
Common industrial telephone set
TASH-11P, TASH-11P-S
The device TASh-11P/TASh-11P-S is intended for ensuring telecommunication and the alarm system in underground developments of mines and mines, as a part of networks of production automatic telephone exchanges. Phone model with a letter "C" in the name (TASh-11P-S) is issued with light duplication of a calling signal.
Model |
Execution |
Degree of protection |
Note |
TASH-11P |
there corresponds GOST24754-81 and has execution "miner normal PH1". |
Degree of protection against influence of environment - "IP65" in accordance with GOST 14254-96 |
- |
TASH-11P-S |
With light duplication of a calling signal |
Functions:
1) telephone conversation;
2) number set in the voice-frequency or pulse mode;
3) emergency call of operators (two directions of a call);
4) memory on 12 numbers, storing of the last dialed number;
5) set of ten numbers of memory two pressing;
6) a possibility of connection of one " sensor dry contact" and automatic transfer of in advance written down speech message according to the specified number at operation of this sensor;
7) automatic return to an initial state at not hung up upon termination of conversation;
8) a possibility of reception of a call at deliberately picked up phone;
9) duplication of a calling signal light signals of big brightness (only for execution of TASh-11P-S).
Technical parameters: |
|||
maximum resistance of a loop, Ohm, |
not less than 2000 |
line tension, In |
5 … 72 |
indicator of attenuation of local effect, dB, |
not less than 8 |
calling tension, In |
36 … 150 |
the loudness of a calling signal at distance of 1 m, dB, |
not less than 95 |
frequency of calling tension, |
10 … 50 |
average time between failures, h, |
not less than 10000 |
average service life, years, |
not less than 6 |
Overall dimensions, mm, |
305х200х90 |
Weight, kg, |
2 |