(View map)
The complex X - ray diagnostic medical KMP SIMURGH F3 with accessories consists of three workplaces and is intended for carrying out routine diagnostic testings at the modern level, with the lowered dose of an oblucheniya. patsiyent and personnel. The first workplace has to be long - distance and is equipped with the digital processor of the image. The complex has to provide roentgenoscopy and a X - ray analysis with automatic control of exposure.
Configuration of system:
- Rotary table support
- High - frequency generator
- Amplifier of x - ray emission
- Digital device
- First X - ray emitter
- The second X - ray emitter with a ceiling suspension
- Table of pictures
- Vertical rack of pictures.
Diversity of a configuration of a X - ray diagnostic complex provides a possibility of performance of different types of researches. The silent motor drive of a x - ray table support SIMURGHF3 provides the optimum speed of an inclination of a table, the movement of a support of a tube, and also table sound board. Fast and exact positioning of a x - ray table allows to minimize research time. The design of system provides full coverage without movement of the patient during diagnostic procedures. The digital technology provides steady high quality of the image.
Features:
- The X - ray diagnostic SIMURGHF3 system is equipped with the high - performance 1 - megapixel Television camera with a CCD matrix.
- The Ekranosnimochny device of the x - ray SIMURGHF3 complex provides performance of a X - ray analysis with use of cartridges of the standard size (to 35 x 43 cm).
- The integrated console of management of a x - ray table – a support, the generator and digital system allows the user to control the research course with the greatest efficiency.
- Different options of a complete set of the device depending on execution of a table of a support, the generator, ESU, X - ray tubes, the digital processor of processing of images, a wide choice of the additional equipment and the software. Fast setup of system for a X - ray analysis of a thorax excludes need for a separate radiographic rack.
- The complex is equipped with convenient multiformat ESU. Governing bodies of a table of a support and the generator are combined in the ergonomic console of the operator with intuitively clear interface, and can be duplicated by the additional control panel in procedural.
- The digital processor of processing of the image allows to archive (on the hard drive, CDR or DVDR disks), to edit and send images on a local network in the DICOM format on the remote server or DICOM the printer.
Technical characteristics:
Rotary table support (1st workplace) | |
Type of the drive of an inclination of a table and movement of ESU | electromechanical |
Table inclination in degrees | - 30 °/ + 89 °. |
Automatic stop in horizontal position. Support inclination speed | not less than 5 ° / sec. |
Range of movement of ESU in the longitudinal direction | not less than 90 cm |
Speed of movement of ESU in the longitudinal direction | not less than 5 cm/sec. |
Cross movement of a sound board | not less than 22 cm. |
Table sound board sizes | 65 cm x 210 cm. |
Table sound board height (from a floor) | no more - 89 cm |
Adjustment height of raising of a sound board of a table | from 69 to 95 cm |
Maximum loading capacity of a table | not bolee150 kg. |
Division of a film | The 2nd, the 3rd, 4 - fold |
The size of the eliminating lattice goes fixed | 38,8х46,4 cm |
High - frequency generator | |
Transformation type | invertor |
Frequency | not less - 50 kHz |
The complex is equipped with the x - ray generator of different power and specified bukvenno in number of model: 1) P – 20 kW - single - phase system of power supply, with a capacity of 30 kVA; 2) L – 50 kW – one - and three - phase system of power supply, with a capacity from 30 to 50 kVA. 3) V – 65 kW – three - phase system of power supply, with a capacity of 75 kVA; 4) B – 80 kW – three - phase system of power supply, with a capacity of 75 kVA; When using protective shutdown UZO of invertor type is applied to prevention failures in high - frequency chains. Time of carrying out roentgenoscopy makes 10 min. , and a X - ray analysis fluctuates from 1 ms to 10 pages. At a X - ray analysis tension of a tube makes 40–125 kV, and at roentgenoscopy – 50–125 kV |
|
Amplifier of the x - ray image | |
URI | 12 "/9"/6" |
Entrance diameter of URI | not less than 300 mm |
Digital device | |
Memory | hard drive na80 GB |
Monitor screen size | not less than 17 inches |
Display matrix | 1280х1024 pixels |
Saving images on the hard drive | not less than 15 000 personnel |
Image matrix | 1024х102412 bits |
Digital roentgenoscopy | not less than 30 personnel/sec. |
Pulse roentgenoscopy | 30/15/7,5/3,75 personnel/sec. |
Serial digital X - ray analysis | not less than 3 personnel/sec. |
Scaling of the image | not less than by 4 times |
Image conclusion to the press | in the DICOM format |
Record of images | in the DICOM format |
Turn of the image | 180 degrees |
Balance of white | automatic |
First X - ray emitter | |
Cooling of a radiator | in the air way |
Speed of the high - speed anode | 9000 rps |
Heat capacity of the anode | 400 KTE |
Tension on a tube | no more than 150 kV |
Size of focal spots | from 0,6 to 1,2 mm |
There is a filter of soft radiation | |
The second X - ray emitter with a ceiling suspension | |
Cooling of a radiator | in the air way |
Speed of the high - speed anode | 9000 rps |
Heat capacity of the anode | 400 KTE |
Tension on a tube | no more than 150 kV |
Size of focal spots | from 0,6 to 1,2 mm |
Cross movement of a tube | 140 cm |
Longitudinal movement of a column with a tube | 295 cm |
Vertical movement | 160 cm |
Range between focus of the field | from 40 to 200 cm are regulated |
There is a filter of soft radiation | |
The tomography without physical hitch of a tube and a kassetoderzhatel is available | |
Quantity of corners of a tomography | not less than 4. |
Table of pictures (the 2nd rab. mesto) | |
Table sound board sizes | not less than 235х80 cm |
Adjustable height of a sound board | over a floor - 53,5 - 85 cm |
Longitudinal movement of a sound board | 110 cm |
Cross movement of a sound board | 25 cm |
Maximum weight of the patient | 200 kg |
Maximum focal length | not less than 130 cm |
Format of cartridges | from 13х18 cm to 35х43 cm |
Tube column turn | 180 ° |
Turn of a tube around a horizontal axis | not less than 240 °. |
The electromechanical elevator for movement of a sound board is available the vertical direction | |
Vertical rack of pictures (3 workplaces) | |
Distance center beeches | floor - from 38 to 190 cm |
The eliminating lattice | 40 lean/cm |
Format of cartridges | from 18х24 to 35х43 |
In system there is a 3 - polny camera of the exposure meter, and also automatic recognition of the size of cartridges. |
