Currency KZT
Compressors for SUG and SPBT Blackmer vapors - for propane, butane, ammik buy in Almaty
Buy Compressors for SUG and SPBT Blackmer vapors - for propane, butane, ammik
Compressors for SUG and SPBT Blackmer vapors - for propane, butane, ammik
kompressory_dlya_parov_sug_i_spbt_blackmer_dlya_propana_butana_ammika
kompressory_dlya_parov_sug_i_spbt_blackmer_dlya_propana_butana_ammika

Compressors for SUG and SPBT Blackmer vapors - for propane, butane, ammik

In stock
Reconfirm the price with seller
For example: +7(50)123-45-67
Shipping:
Kazakhstan, Almaty
(View map)
+7(7 
Display phones

Company rating

100% of positive reviews from 5
7
7 years on Allbiz
Technical characteristics
  • Country of manufactureUnited States
Description

Single-stage piston compressors of Blackmer firm provide the maximum productivity and reliability in the heaviestoperational conditions. All parts which are exposed to pressure are made of malleable cast iron for bigger thermal and mechanical stability. The design provides simplicity of maintenance and convenient access to all components.

Blackmer gas compressors are intended for work with:

  • anhydrous ammonia;
  • propane;
  • butane;
  • propane mixes with butane.

They are ideally suited for:

- systems of unloading of railway tanks. It is reasonable to perform some operations of pumping of liquid at achievement of certain conditions with use of gas compressors, but not with use of pumps. Unloading of transport and vessels under pressure when the pipeline of system limits flow is among such operations and can cause cavitation in the pump; unloading of petroleum liquefied gas from the railway tsisteren and other tanks demanding initial raising of liquid.

When pumping liquid the compressor creates small difference of pressure between the unloaded vessel and receiving capacity. On compressor admissin stroke the piston involves couples and lowers pressure in the accepting capacity. On exhaust stroke there is movement of the measured volume of vapors under higher pressure in the unloaded tank where they force out equal it, liquid volume through separate line in receiving capacity.

- systems of recuperation of vapors. After completion of pumping of liquid considerable quantity of product about 3% (in gaseous state) remain in the tank. Recuperation of product by means of the compressor represents rather simple operation, and the compressor will quickly pay for itself.

Recuperation of vapors is carried out by means of the four-way crane. If to turn its handle on 90 °, the direction of gas flow will change on opposite, and the vapor pressure in the unloaded tank will decrease. At this stage the remained liquid turns into couples which are quickly caught. At further pressure loss in the tank the remained couples are also caught to economically reasonable level. The caught steam is dumped to the area for liquid in receiving capacity and again condensed, passing into liquid state.

Blackmer makes four models of compressors of the Lbproizvoditelnostyyu series from 11,9 to 212 m3/hour with maximum pressure on forcing to 24,13 bars.

Technical datas of the Blackmer compressors of the LB series

* double deystviya1 the Compression ratio is defined as absolute pressure at the exit, divided into absolute pressure on vkhode.2 the Compression ratio is limited to forcing temperature.

The Blackmer company offers the following complete sets of compressors of factory assembly:

CO complete set - turns on only the compressor with flywheel

Complete set In:

  • compressor;
  • manometers;
  • steel basis;
  • wedge-belt drive;
  • protection of the belt gear;
  • adjustable basis for the engine.


LU complete set:

  • compressor;
  • manometers;
  • steel basis;
  • the liquid trap with mechanical float;
  • receiving filter;
  • internal pipelines;
  • four-way crane;
  • wedge-belt drive;
  • protection of the belt gear;
  • adjustable basis for the engine.

Complete set of LC, LW:

  • compressor;
  • manometers;
  • steel basis;
  • the liquid trap of uvecheny volume according to the ASME standard with the electric relay of the NEMA7 level and with the relief valve;
  • receiving filter;
  • internal pipelines;
  • four-way crane;
  • wedge-belt drive;
  • protection of the belt gear
  • adjustable basis for the engine.

In LW complete set the pipeline binding is executed in flange accession.

Complete set of TC, TW:

  • turns on the compressor;
  • manometers;
  • steel basis;
  • the liquid trap according to the ASME standard with the electric relay of the NEMA7 level and with the relief valve;
  • receiving filter;
  • internal pipelines;
  • wedge-belt drive;
  • protection of the belt gear;
  • adjustable basis for the engine;
  • the crane for draining of condensate from the liquid trap.

The complete set of TW provides welded and flange accessions of pipes.

Shipping method
Contact the seller
Compressors for SUG and SPBT Blackmer vapors - for propane, butane, ammik
Compressors for SUG and SPBT Blackmer vapors - for propane, butane, ammik
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Compare0
ClearSelected items: 0