Container unit of ultrahigh pressure Falch Cont jet 200 e

Water-jet installation of ultrahigh pressure of 1200 bars, water consumption - 80 l/min, the electric motor

• The container with the equipment installed on a frame. Easy movement by means of a loader of containers, the crane, the trailer or the truck. This concept was developed for works under opened by the sky or within the large industrial enterprises when all technical equipment of system is mounted in the closed block. In case of a rain, or under the scorching sun in operating time the container will protect snow not only installation, but also your operators. Besides, there is enough place for storage of cables, hoses, guns, nozzles, the tool and spare parts.
• The filter of rough and thin cleaning for steadily quality water.
• The built-in water tank from the stainless steel painted in the powder way. Compensates fluctuations of pressure of water on an entrance and increases service life of the pump of a high pressure, excepting hit of air in the pump.
• The pump of pumping of water for optimum water supply of the pump of a high pressure.
• The piston low-resourceful pump fach for extreme loadings and long service life. Expenses on service and maintenance are minimum due to use of high-quality materials and components. The simple and strong design of the pump provides easy and inexpensive replacement of the worn-out parts even in years of operation. Valves and a head of the pump from stainless steel. Durable pistons, built-in cooling of plungers. The easy head, the excellent heat sink, strong consolidations and laying of a high pressure - all this extends service life, is easily replaced and costs not much. The reliable drive at the expense of the divided design provides 10'000 motochas of work without hit of water in oil.
• Adjustable working pressure.
• Safety devices as an explosive disk or the safety valve prevent inadmissible increase of pressure.
• The 132 kW electric motor with a power stock for 100% of continuous work and smooth start-up for prevention of an overload of a network.
• Basic delivery switched on the frequency converter thanks to which it is possible to regulate installation pressure.
• Safety/control: for safety of system in general, some components are installed with the margin of safety exceeding requirements for safety. The electronic system "falch easy" exercises complete control of the car. On the display of system it is possible to see engine turns, pressure in system, motochasa, hours to that and another is much.
• The counter for control of an operating time of motochas and service intervals.
• The built-in system antifreeze, for prevention of freezing of mobile installations and ensuring year-round operation.
• Hose of a high pressure of falch nonstop 12, 20 of m, 1.200bar, 70 °c, internal diameter of 10 mm - on 2/3 smaller losses of pressure in comparison with a hose of 8 mm, 4 steel covers provide additional durability without costs of repair.
• The coil which is switched on in delivery for a hose of a high pressure will keep a great lot of time and the place.
• Cable of management 25m with the coil for storage.
• The gun of a high pressure falch gun 25, with electromanagement and a shoulder rest guarantees long work with the minimum load of the operator.
• Peak with the holder of a nozzle and a flat nozzle for safe work.
• Accessories of falch firm expand a scope of the equipment and give the chance to save time during the work.
• Thanks to optimum protective clothes and special training operators achieve the best results in work quicker.