Coverings floor antistatic Rizopoks™
- Customer pickup,
- Courier
- In detail
- Country of manufactureKazakhstan
Coverings are floor antistatic
Application:
For receiving antistatic (106 Ohms) the coverings of a floor maintaining mechanical influences of moderate intensity at the movement of wheel transport on rubber and plastic to the course, pedestrians and carts on rubber and plastic to the course, and also chemical influences of water, fuels and lubricants, the diluted acids and alkalis of average intensity.
| № | Operation | Material | Expense
kg/sq.m |
Tool,
way |
| 1. | Preparation of a surface | Materials of the SMT company | Depending on a situation on object | According to the document "The management on
to the device antistatic floor coverings" |
| 2. | Primer | Ризопокс™ - 1100 | 0.3 ¸ 0.4 | The roller resistant to solvents with a pile length the 15-18th |
| 3. | Conducting layer | Conducting copper tapes and anchors of grounding | According to the area and geometry of the room | Manually. According to the document "Guide to the Device of an Antistatic Covering of a Floor" |
| Conducting primer | Ризопокс™ - 1410 AS | 0.1 ¸ 0.12 | The roller resistant to solvents with a pile length the 15-18th | |
| 4. | Antistatic covering | Ризопур™ - 5120 AS | 2.2 ¸ 2.5 | Gear pallet
(profile 48 type) or adjusting trovel (Raquel) |
| TOTAL | ||||
General thickness: 1.5 ¸ 1.7 mm
Recommendations about drawing a covering:
1. Watch requirements to preparation of the basis in the document "Guide to the Device of an Antistatic Covering of a Floor".
2. After drawing Rizopur™-5120 of AS the surface needs to be processed the needle roller.
3. It is necessary to observe most precisely consumptions of materials as conducting properties of a covering directly depend on thickness of layers.