Decorative plaster - a fur coat, Bergauf DIADEMA

Main properties
— for systems of thermal insulation of facades
— for internal and exterior decorative finish
— white
— frost-resistant

Characteristics of application

Consumption of dry mix on 1 sq.m: 3,7-4 kg
Drawing thickness: 2,5-3 mm
Viability of ready solution in an open container: 3 hours
Durability totality time (at t = + 20C): 28 days
Work at a basis temperature: from +5 °C to +25 °C

Characteristics of operation

Branded durability: M 50
Durability on compression (in 28 days): 5 MPas
Durability on a bend (in 28 days): not less than 0,5 MPas
Operation temperature: from -50 °C to +70 °C
Frost resistance: F 50

Structure

The white cement, marble powder, fractional filler modifying polymeric additives.

Preparation of the basis

The basis has to be equal, strong, dry, possess the bearing ability.
Before drawing to clear a surface of dirt and dust, the exfoliating old coverings and oil spots – everything that can worsen adhesion of material to the basis. It is necessary to process the prepared basis a primer of "Bergauf" ("PRIMER" or "TIEFGRUNT", depending on type of the basis and the sphere of works).

Strongly absorbing bases (for example, cellular concrete) should be grounded twice. Concrete, reinforced concrete and other low-absorbing bases we recommend to process Bergauf Beton Kontakt.
Before plastering large cracks it is recommended three days prior to the main plastering to close up plaster structure (for example, Bergauf Bau Putz Zement).
In case the surface of the basis is not a progruntovana, fast loss of mobility of solution, reduction of time of formation of the invoice, a treshchinoobrazovaniye and decrease in durability of the hardened solution is possible.