Details connecting of polyethylene and metal for gas and water supply

The plug under a flange extended, semi-long, the transition extended, a flange with software covering, the branch extended, the transition extended, transition GPP PE/steel, the tees extended and reducing extended, the cap extended. Connecting of polyethylene and metal for gas and water supply you can get all these details in Vitkhim-Kazakhstan LLP.

Polyethylene fitting allows to make installation of the pipeline quickly and safely, to provide high tightness of connection of pipes without application of a difficult technique. By means of a polyethylene fitting it is possible to create necessary quantity of bends and to vary pipe length, labor input of installation works significantly decreases, besides – they allow to minimize quantity of waste and consequently, to reduce material inputs by construction of a network. To the main advantages of PE of a fitting the small weight, high durability, resistance to physical and chemical impact, the smooth internal surface which is not provoking emergence of blockages and deposits, low heat conductivity is.
The Vitakhim-Kazakhstan LLP company presents to your attention production for networks of pressure head water supply, gas supply, the sewerage and heat supply from polymeric materials.

Branches 90 connecting for water and gas pipes. Branches 90 are intended for connection of pressure head pipes from polyethylene, made by a molding method under pressure. Branches are intended for the pipelines transporting water including for economic and drinking water supply, at a temperature from 0 to 40 degrees on With, and also other liquid and gaseous substances.

In our company "Vitakhim — Kazakhstan" the producer extended with PE makes high-quality cast transition both for a water supply system, and for sewer systems. At the same time does not matter, the pipeline pressure head or not. Transition cast extended polyethylene – is used in cases when change of diameter of the pipeline on smaller or bigger is necessary. Any installation works of transitions to a pipe can be performed when using the welding equipment, both for elektomuftovy methods of welding, and for contact. It should be noted that at us the order of transitions of any configuration, any diameter and size is possible. Price for products calculates individually, taking into account product parameters. Branch the cast extended PE – is used in installation works with pressure head pipelines. It is applied in system places where there is a branching, turn, the pipeline reinforcing part joins, route diameter and so on changes. Such details are made with application of a method of molding with a high pressure. After production the method of machining from polyethylene materials of the minimum durability is applied. All production pass special control at any production phases, we strictly watch manufacturing techniques, introducing new techniques in work. It gives us the chance to achieve the best qualitative results. In our company on branch cast extended polyethylene production it is accurately arranged and has all appropriate certificates of quality. The tee the cast extended PE – is used for connection of versatile pipes, to be exact – pressure head, pipeline and water pipes. Such connections are, as a rule, intended for creation of routes on movement of substances both gaseous, and liquid. Use of similar substances when passing on pipes does not exert impact on a condition of the pipeline.

The tee reducing cast extended for polyethylene pipes has three exhaust outlets that allows to attach two branches to the main pipe. The main destination of this product is the branching of pipelines of different diameter. The polyethylene fitting is intended for construction of pressure head pipelines in places of turns, branchings, changes of diameter of the route, connection of pipeline fittings, etc. Are made by method of pressing of pipe preparations with the subsequent machining. Products are intended for connection by welding end-to-end with pipes, transporting water for economic and drinking water supply at a temperature from 0ºС to 40ºС, and also other liquid, gaseous substances to which polyethylene is chemically resistant

Transition of PE cast can be used in pipeline systems where there are different environments: water, gas, steam, oil products, etc. It rather well maintains differences of temperature condition and pressure which take place in pipeline systems. Such transition can be used not only on pipelines which are under control from supervisory authorities: quite often it is used also on those communication constructions which are not controlled by appropriate authorities. Use of transition of PE cast gives the chance to cut expenses on operation of pipelines, and also to reduce costs which are connected with their maintenance. It promotes increase in demand for them from the companies and the organizations which carry out construction and repair of water supply systems, sewer systems, gas pipelines, and also many other communication constructions. It is possible to get transition of PE cast for the cash and clearing settlement different parties depending on needs of customers. It is rather simple to establish it, and he does not demand use of special equipment and the equipment

Flanges with a covering of software are connecting parts of pipes, as a rule, the representing flat rings or a disk with evenly located openings for bolts and hairpins. The flange for pipes PND is intended for connection of polyethylene pipes to latches, cranes and other pipeline fittings. Flanges with a covering of software are mounted together with a special burt or the plug under a flange for which ledge, and the flange is established. As the plug before burty has a special strengthening expansion, the standard flange cannot densely adjoin to an otbortovka therefore apply the flanges chiseled. Internal diameter of such steel flange is chiseled to diameter necessary for its free nasazhivaniye on the polyethylene plug. The intercenter distance of flanges for PE of pipes, quantity and diameter of openings completely coincides with usual flat flanges.

Transitions PE/steel are necessary for laying of the pressure head sewerage, water systems, gas pipelines. With their help it is possible to carry out transition of system with steel on a polyethylene pipe and vice versa, to carry out installation of pipeline fittings and so forth. It is important that such transition does not need special service, it can be located on a straight section of a network, directly in soil. Admissible service conditions depend on production material – PE80 or PE 100, and also features of system – there will be it the gas pipeline, a water supply system or other communications. Transition installation PE/steel is carried out by welding – thermistor or end-to-end.

On all questions address to sales department of our company.

Let's be glad to work with you!