(View map)
The photofluorograph 12F9 is completed with the mid-frequency feeding URP-SCh device with a power of 30 kW. It allowed to lower tension pulsations on a x-ray tube, having increased thereby the term of its service and to improve the accuracy of maintenance of anode tension to 2% at all destabilizing factors. Besides, approximately, the exposition, and, respectively, a radiation dose received by the patient during a picture was reduced by 20%.
The device is irreplaceable for inspection of the population in the remote remote areas, the mountain district with limited transport communications.
The photofluorograph is transported in unassembled form in cases which are used as device components. The mass of one place — no more than 80 kg. The number of places for a basic complete set — 7. The minimum width of an aperture for loading — 580 mm. The device can be transported on any kind of transport, including the helicopter and a cartage. The photofluorograph is mounted by forces of two people within one hour.
In the device the mid-frequency feeding URP-30-SCh - "AMICO" device and the modern microprocessor control panel are used. The photofluorograph can be completed: Chamber of x-ray film KRP-70 or Chamber flyuorograficheskoya KF-400 KF-400.
Technical characteristics |
|
The maximum number of the served patients in an hour, persons |
60 |
Dose for a picture (at 60 kV, a direct projection, 70 mm), μR |
2 500 |
Dose for a picture (at 60 kV, a direct projection, 100 mm), μR |
5 000 |
Amount of working focus |
1,2×1,2 |
Tension on a x-ray tube, kV |
60 — 125 |
Accuracy of maintenance of anode tension, % |
± 2 |
Installations of the relay of an exposition, Mas |
4 — 250 |
Requirements to the power supply network |
Three-phase, 380 V ± 10%, 50/60 Hz, 1 Ohm |
The largest power consumption (quickly), kW |
20 |
Overall dimensions no more, mm |
2 650×1 350×2 200 |
The mass of the device with a set the ZIP gross (net), kg |
870 (570) |
