Double rotational Revent 723 furnace

Standard features:
> Revent TSS System
> Revent HVS System
> Revent LID System
> Compact cross heat exchanger
> Revent wedge - shaped adjusting system
> Faultless steel structure
> Digital panel of management - IAC
> Automatic steam control
> Double glass of door
Requirements for installation:
Electric equipment
> the most widespread types of 3 - phase food
Water and waste
> Water supply: outer diameter 1/2" 4,5 kg/cm2 (450 kPa)
> Waste: 1" connection (additional connection on the right side)
Ventilation
> Channel of excessive pressure:
(from doors to extract)
> Exhaust gate of the furnace:
(from doors to extract)
> Exit of gases - Ø 250 mm (only for liquid - fuel and gas heaters)
> Cap opening: Ø 252 mm

Technical information:
> Maximum thermal power: see the plate
> Temperature: 50 - 300 °C
> Gross weight when transporting: 2960 kg *
> The hatch through passage for installation:
1025 x 2020 mm (standard delivery in 3 parts) 2020 x 2600 mm (by delivery of the assembled furnace)
> The minimum height for
installations of the furnace (canting) - 3100 mm
> Diameter of turn: 1600 mm
> Maksinalny loading of platform: 600 kg
> Steam formation: 11 l / 20 sec.
> Trebovoniya on installation: The furnace has to be installed on horizontal, not flammable floor. The furnace can be installed closely to wall - only front and upper parts have to be open for access. The space over the furnace needs to be aired (to use the fan) that temperature has not exceeded 50 °C. At such temperature can
electric parts to be exposed
to damage.