Edge-milling F-10 machine

Kromkofrezerny F-10 machine
Edge thickness: 0,5-2 mm, panel Thickness: 16-45 mm, Engine capacity: 1,5 kW

The Kromkofrezerny F-10 machine - is intended for removal and radial milling of sves of an edge.
- The machine works as with straight lines, and curvilinear details. - The machine processes top and lower sves for one pass of a detail. - The mobile milling knot excludes need of change-over of the machine on preparation thickness. - Working range of thickness of the processed detail: from 16 mm to 45 - mm. - This model is completed with tortsovochny knot (cutting of a face sves) and knot of milling of a corner (radial milling of face connection of edges). = This model is a semiautomatic device, all operations are most automated. In comparison with a manual milling cutter, the F-10 machine - will allow to increase work productivity at least three times.

 - - - - -

Technical characteristics
material of edges:	PVH, AVS, acryle
thickness of edging material:	from 0.5 - to 2.0mm
width of edging material:	from 16 - to 45 mm
the external processed radius:	it is not limited
the internal processed radius:	50 mm
preparation giving:	manual
bilateral milling of sves:	is
tortsevaniye of sves:	is
milling of angular connection of edges:	is
power supply:	380B
general electric power:	1.5 -
frequency of rotation of a mill:	11000 -
working pressure of air, atm:	4 - — - 8 -
special requirements:	existence of the compressor

 -

 - - - - - -

Technical characteristics
material of edges:	PVH, AVS, acryle
thickness of edging material:	from 0.5 - to 2.0mm
width of edging material:	from 16 - to 45 mm
the external processed radius:	it is not limited
the internal processed radius:	50 mm
preparation giving:	manual
bilateral milling of sves:	is
tortsevaniye of sves:	is
milling of angular connection of edges:	is
power supply:	380B
general electric power:	1.5 -
frequency of rotation of a mill:	11000 -
working pressure of air, atm:	4 - — - 8 -
special requirements:	existence of the compressor

 -

 -

 -