Elektroshtroboreza, Borozdodel OM-115/1300
- Customer pickup,
- Courier
- In detail
ekhnichesky characteristics:
| Power consumption: | 1350 W |
| Depth spent on drink: | - at an angle 90º - 34 mm; - at an angle 45º - 22,5 mm |
| Maximum diameter of a cutting wheel: | 110 mm |
| Diameter of a landing opening: | 20 mm, 22,2mm (when using a transitional ring) |
| Current frequency: | 50 Hz |
| Food cord: | not less than 4 m |
| Safety class: | II (in accordance with GOST P MEK 60745-1) |
| Landing diameter of a flange: | 20 mm |
| Thickness of a cutting wheel: | no more than 2,0 mm |
| Established period of service: | 2 years |
| Rated voltage: | 220 V ~ |
| Rotation frequency: | (spindle idling) no more than 13000 rpm |
| Dimensions: | 255х230х228 |
| Weight: | 3,2 kg |
Complete set:
The car detachable - 1 piece.
The operation manual and security guidelines - 1 piece.
Disk diamond (it is established on a saw) - 1 piece.
Transitional ring - 1 piece.
Special wrench - 1 piece.
Wrench - 1 piece.
Packing - 1 piece.
The complete set of model can change the manufacturer.
Description of work:
When performing construction and repair work often there is a need of cutting of various finishing materials - a ceramic tile; porcelain tile; a facing tile from a natural stone - marble, granite, sandstone and other decorative types of a stone; paving slabs, a tile and other materials, cutting of flutes for improvement of adhesion of construction solutions. It was necessary to perform these works as the grinder earlier (perhaps only with skills of cutting) or by means of the desktop machine (the big weight and the size, not all operations are possible).
INTERSKOL offers the easy small detachable machine - OM-115/1300 - in fact it is a diamond saw by means of which without effort it is possible to cut quickly and precisely material of any hardness up to 34 mm thick. OM-115/1300 easily carries out a cut at an angle from 90 to 45 degrees that happens it is necessary for accurate laying of coverings - it is almost impossible to perform such work UShM, and OM-115/1300 copes with it without effort, maintaining the corner established to degree.
ATTENTION: THE CAR IS NOT INTENDED FOR "THE WET CUT" IT IS FORBIDDEN TO WORK WITH WATER SUPPLY!
Features of the detachable car:
- easy, compact design - it is possible to operate the car even at height;
- the adjustment of depth of a cut allowing to carry out cuts of a certain depth;
- adjustment of a tilt angle from 90 to 45 degrees;
- the powerful engine allows to perform the most hard work with a high speed;
- excellent dust protection of the engine, bearings and reducer, button;
- the mechanism of fast replacement of brushes allowing to perform this operation without opening of the case;
- long 4kh the meter cord of food gives to the operator the chance to perform the majority of works without additional extender;
- the rubberized handle allows to hold the car more reliably.