Enamel (various flowers) CAAH Color EP-140
- Customer pickup,
- Courier
- In detail
- Country of manufactureKazakhstan
Name: EP-140 enamel of various flowers
Type: Material two-packing on the basis of epoxies.
Application: for coloring of previously grounded surfaces from steel, magnesian, aluminum and titanic alloys, and also copper and its alloys. EDS enamel - 140 is applied in aircraft industry, mechanical engineering, other purposes. It is allowed to use enamel for coloring of plastic.
Description: pigment suspension in solution of a kolloksilin and alkidno-epoxy in flying organic solvents with addition of softeners, a basis: a hardener and the FATHERS aluminum powder - 2.
Technical characteristics:
Conditional viscosity of a semi-finished product of enamel on the VZ-246 viscometer with a diameter of nozzle of 4 mm at a temperature (20±0,5) °C, with | 13-19 |
Mass fraction of nonvolatile substances of a semi-finished product of enamel ep-140, % | from 34 to 61 (depending on color) |
Enamel semi-finished product reshooting gallery degree (except silvery), micron, no more | 40 |
Time of drying of a semi-finished product of enamel to degree 3, h, no more at a temperature (20±2) °C | 6 |
at a temperature (90±2) °C | 2 |
Covering hardness on the pendular TML device (a pendulum And), otn. unit, not less | 0,5 |
on the pendular M-3, conventional unit device., not less | 0,6 |
Elasticity of a covering at a bend, mm, no more | 2 |
Firmness of a covering at a temperature (20±2) °C to static influence, h, not less: water / oil/gasoline |
24/24/24 |
The thermal stability of a covering of enamel silvery at a temperature (250±5) °C, hour, not less | 3 |
Covering durability at blow to the U-1 device, cm, not less enamel of khaki | 40 |
enamels of other flowers | 50 |
Covering ability of enamel, g/m2, no more dark green color | 75 |
yellow color | 120 |
Thinner: solvent of the R-5 brand or mix of solvents consisting of acetone, an etiltsellozolv and the xylol taken in the ratio 30:30:40 on weight.
Cleaning of the tool: Xylol, 646, 647, 648, R-4, R-5
Preparation of a surface: The painted surface has to be grounded by primers VL-02, VL-023, AK-070, EP-0199.
Ways of drawing: by method of pneumatic dispersion, in bulk or brush
Conditions when drawing: Before application mix an EDS enamel semi-finished product - 140 with a hardener in the ratio which is specified in the passport. EDS enamel - 140 mix, maintain 10 minutes and start coloring in any painting way.
Precautionary measures:
- EDS enamel - 140 is flammable!
- Not to work near open sources of fire.
- To perform works at good ventilation, in rubber gloves, with use of individual means of protection.
- Not to allow EDS enamel hit - 140 in respiratory organs and digestion.
- At EDS enamel hit - 140 on skin to wash out it warm water with soap.
- To protect from children!
Storage: indoors, having excluded hit of direct sunshine on it and moisture at a temperature not higher than 300 Pages.