End face - grinding machine brand FMGroup for finishing and intermediate grinding of straight edges of various parts.
Two sanding belts 100mm high each with brushed sanding segments that can be easily installed and removed from the sanding belt, each set of sanding segments can be with different grits.
Specifications
10.. .45 m/min
Belt speed (continuously adjustable)
30 mm
Grinding stroke during grinding
30 doors strokes/min
Grinding unit stroke frequency max.
6 - 8 kgf/cm2
Air pressure
80 l/min
Air consumption max.
0.8 kW
Installed capacity
1 phase, 220V
Voltage and network type
850 * 2200mm
Desktop dimensions
The machine is equipped with a brush sanding belt for preliminary or intermediate grinding of straight edges of various workpieces.
Two sanding belts 100mm high each with brushed sanding segments that can be easily installed and removed from the sanding belt, each set of sanding segments can be with different grits. The grinding device is pneumatically raised and lowered, bringing one or another grinding belt into the working area.
✔ Intermediate grinding
✔ Fine sanding of lacquer coatings
✔ Primary sanding of MDF
✔ Finishing the edges of the front panels
✔ Brush sanding with full imitation of "hand" sanding.
✔ Automatic oscillation of the sanding belt to achieve the best result on the top and bottom edges of the workpiece.
✔ It is possible to install sanding segments with different lengths 30/45/60 mm
