- Country of manufactureRussia
- Kind of profileFront
|Model||Face profile||Face profile||Face profile||Face profile||Face profile|
|Thickness of a leaf of joint project company||Face profil4||Face profil6||Face profil8||Face profil10||Face profil16|
|Length, mm||Face profil2100||Face profil2100||Face profil2100||Face profil2100||Face profil2100|
The P-shaped profile is intended for closing of end faces and a decorative frame for giving of esthetic completeness to the last both at vertical, and at an arch glazing in order to avoid formation of condensate in the panel and penetration into it of the mechanical particles polluting internal cavities of a sheet of cellular polycarbonate. The design of a profile provides circulation of an air stream.
The design of a profile can provide fixing of a profile at end faces of panels of polycarbonate. In this case the profile densely "puts on" on an end face of the panel and reliably keeps, without sliding off. He does not demand gluing or any other additional fastening. Fixing of a profile on a face edge of a sheet of polycarbonate can be also carried out by means of the silicone adhesives (silicone) which are combined with polycarbonate, or other any decisions with use of clamping elements of the bearing design. Face the P-profile happen different and correspond to polycarbonate 4 mm, 6 mm, 8 mm, 10 mm and 16 mm thick panels. Profile length - 2,1 meters.