(View map)
Filters for cylindrical medical biksov series KF and LABORATORY EQUIPMENT allow for sterilisation of supplies and medical supplies in steam sterilizers under pressure 0.2 MPa (kgf/cm 2 square meters) at a temperature of 132 g. C for 20 - 22 min. Or under the pressure of 0.11 - 0.13 MPA (1.1 - 1.3 kgf/cm²) at 120 - 122 Gr. C for 45 - 48 min.
The filters are made of thick cotton fabric - filterdiagonal cloth (fabric technical filtering), specially designed for filtering solutions for various industries and in non - ferrous metallurgy.
Filters are suitable for repeated use and easily recycling through incineration. Filters are designed to withstand at least 60 sterilization cycles, then must be replaced. For a complete set of boxes use Filter Kit (the kit includes two filters) that are installed on the bottom and the lid of the box through the clamp screw and bolt - nut that secures the filter fixation between the clamp and lid (bottom) of the box.
The surface density of 575 ± 25 g/sq. m.
Surface density on the basis of 220 g/sq. m.
The surface density of weft 110 g/sq. m.
Breaking load cavity tissue size 50 x 200 mm. on the basis of at least 181 (185) Dan (kgf).
Breaking load cavity tissue size 50 x 200 mm. in at least duck 88 (90) Dan (kgf).
Elongation fabric Strip size 50 x 200 mm. on the basis of not less than 26%
Elongation fabric Strip size 50 x 200 mm. weft is not less than 6%
Thickness 1.4 ± 0.2 mm.
Fabric content 100% cotton