Floors industrial bulk with rigid and elastic multilayered system 4610 5710
- Customer pickup,
- Courier
- In detail
- Country of manufactureKazakhstan
- Anti-slip propertiestYes
- AntistaticityYes
Rigid and elastic multilayered sistema4610 5710
Application: For the device of the coverings of a floor maintaining mechanical influences of considerable intensity at the movement of wheel transport on rubber and plastic to the course, carts on metal wheels, and also chemical influences of water, fuels and lubricants, the diluted acids and alkalis of average intensity. It is resistant to shock influences to 10 kg, to shift loadings, to differences of temperatures and disclosure of cracks in the basis to 0,8mm.
Chastichnovyravnivayet basis.
| № | Operation | Material | Expense
kg/sq.m |
Tool,
way |
| 1. | Primer | Ризопокс™ - 1100 | 0.3 ¸ 0.4 | The roller resistant to solvents with a pile length the 15-18th
WITHOUT POWDER SAND |
| 2. | Drawing an elastic polyurethane membrane | Ризопур™ - 4120 | 2.0 ¸ 2.3 | Gear pallet
(profile 48 type) or adjusting trovel (raklya). To process the needle roller. |
| 3. | Drawing a rigid power layer | Ризопур™ - 4120 | 1.8 ¸ 2.2 | Gear pallet
(profile 48 type) or adjusting trovel (raklya). To process the needle roller. |
| Filling | The calcinated quartz sand, fraction 0.4-0.8mm | 5.0 ¸ 6.0 | Manually to a state "under a fur coat".
Not to leave on a surface of damp spots. |
|
| 4. | Cleaning and
preparation of a surface |
Sweep away excess sand.
To remove dust the industrial vacuum cleaner. |
||
| 5. | Front layer |
Ризопокс™ - 4610
or Ризопокс™ - 5710 |
with the general
expense 0.6 ¸0.8 (it is put for 2-3 layers) |
The roller resistant to solvents with a pile length the 8-12th not to allow formation of pools and potek. |
| TOTAL |
General thickness: 4.0 ¸ 4.5mm
Recommendations:
Before drawing a covering the surface of the basis has to be appropriately prepared (see requirements to the basis in descriptions on materials). For achievement of high shock resistance, resistance to disclosure of cracks, to differences of temperatures and resistance to high dynamic loadings the basis has to have flatness no more than 4 mm by 2 m. Before drawing a covering local defects of the basis: hollows, chips, small on the area of "wave" with abrupt edge have to be eliminated.