FLUID SOLUTION FOR INSTALLATION AND REPAIR OF MEGAMIX GROUT
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- State of the materialDry mixture
Description
FLUID SOLUTION FOR INSTALLATION AND REPAIR OF MEGAMIX GROUT
FLUID SOLUTION FOR INSTALLATION AND REPAIR the Description: "Megamix Grout" is solution on a cement basis, with mineral fillers, possessing high degree of mechanical stability, with nonfreezing, fluid property. Unicomponent it is also used with addition only of water. Temperature during work: higher than +5 About Term uses of the prepared mix: (20C/kg of mix) 40-50 minutes. Stability of sticking: more than 1 N/mm2 mixing Proportion: ~ 6 - 6,5 liters of water Density of fresh solution: 2,10 grams/cm2 powder rash Density: 1,5 kg/sq.dm of the Place of application: For installation of equipment and in places of laying of rails; for repair of beams and columns, and also for work with a capital; for repair of emptiness and wide cracks on the Earth's surface; for anchoring and installation of metal fittings on the basis. Preparation of a surface: The surface has to be pure and strong, it is necessary to clear a surface of dust, rusts, fat, dirt or other substances interfering sticking, it is necessary to remove the remains of solutions, cement, etc. That the surface was pure and without any free particles. After cleaning of a surface for stronger sticking of solution to a surface and gluings of dust to a surface, it is necessary to counterbalance absorption of a surface. For this purpose to be applied with a brush on a surface 1 layer of a liquid primer of "MEGAMIX PRIMER" is left for drying for 1-2 hours. If the surface strong and not strongly absorbing, instead of application of a primer, in 30 minutes before work can be humidified a surface. Mix preparation: In a pure, round container pour about 6-6,5 liters of clear water, and constantly mixing add 1 bag (25 kg) of powder. Mixing continues before receiving the uniform, not containing weight anklebone. Mixing is necessary carries out by the mixer with a low turn. If you mix mix manually, we recommend to prepare mix more in small lots. Application form: The area which needs to be covered needs to be protected with an impenetrable form. It is necessary to leave one or several openings for production of air. In case there are dense equipments or thin emptiness, after filling by piercing assistance for solution laying is rendered. In order to avoid formation of airbags under wide layers, it is necessary to carry out mix filling on the one hand. Solution consumption: for thickness of 1 cm of 18 kg/sq.m. Period of storage: with a storage condition in original packing and in the dehydrated (not damp) medium - 12 months. What it is necessary to pay attention to: At work on the open district, do not work in windy and strongly sunny weather. Do not add additional water, cement, etc. to mix. Categorically do not apply on the chilled, dusty and dirty surfaces.Contact the seller
FLUID SOLUTION FOR INSTALLATION AND REPAIR OF MEGAMIX GROUT