(View map)
- BrandSTALEX
- Country of manufactureChina
Formatno raskroyechny MJ6128C machine
Move. length of the carriage is 2800 mm, Engine capacity is 4 kW
The Formatno - raskroyechny MJ 6128C machine without inclination of the main saw on 45 - degrees, is intended for cutting of panel board materials chipboards, DVP, etc. This machine is recommended to be used at the small and medium - sized enterprises which are engaged in production of furniture under the order. The low cost, universality, the small occupied space, simplicity in work and service. For positioning and supply of panel board materials the mobile carriage and the supporting frame is used. Existence of cutting knot allows to avoid formation of chips at a pileniye of the panels revetted with an interline interval, a laminate, plastic or PVC a film. In a basic complete set the machine is equipped with a ruler for cuts at an angle and the protection cover with an aspiration branch pipe which is established on the wedging knife.
-
| Technical characteristics | |||||||||
|
Maximum length of preparation (mm) |
2800 - |
||||||||
|
Maximum width of preparation (mm) |
900 - |
||||||||
|
Maximum thickness of preparation (mm) |
65 - |
||||||||
|
Diameter of the main saw (mm) |
250 - 350 - (30) |
||||||||
|
Diameter of a cutting saw (mm) |
120 - (20) |
||||||||
|
Frequency of rotation of the main saw (ob. min. ) |
4620 - |
||||||||
|
Frequency of rotation of a cutting saw (ob. min. ) |
7485 - |
||||||||
|
Engine capacity of the main saw (kW) |
4 - |
||||||||
|
Engine capacity of a cutting saw (kW) |
0,75 |
||||||||
|
Tension of the power supply network (B) |
380 - |
||||||||
|
Dimensions of DhShhV (mm) |
2870х2650х900 |
||||||||
|
NET WEIGHT (kg) |
580 |
||||||||
-
| Technical characteristics | |||||||||
|
Maximum length of preparation (mm) |
2800 - |
||||||||
|
Maximum width of preparation (mm) |
900 - |
||||||||
|
Maximum thickness of preparation (mm) |
65 - |
||||||||
|
Diameter of the main saw (mm) |
250 - 350 - (30) |
||||||||
|
Diameter of a cutting saw (mm) |
120 - (20) |
||||||||
|
Frequency of rotation of the main saw (ob. min. ) |
4620 - |
||||||||
|
Frequency of rotation of a cutting saw (ob. min. ) |
7485 - |
||||||||
|
Engine capacity of the main saw (kW) |
4 - |
||||||||
|
Engine capacity of a cutting saw (kW) |
0,75 |
||||||||
|
Tension of the power supply network (B) |
380 - |
||||||||
|
Dimensions of DhShhV (mm) |
2870х2650х900 |
||||||||
|
NET WEIGHT (kg) |
580 |
||||||||
-
-
