Gas copper of Navien 16 of KV

An opportunity to use heating and hot water even with a low pressure of gas

The copper steadily and safely works with a pressure of gas of 4 mbar (40 mm of water column) thanks to what it perfectly proved.

An opportunity to use hot water even with the low entering water pressure

The copper steadily works with a pressure of water less than 0.1 bars thanks to what it it is possible to be used in multystoried buildings where the pressure of water is insufficient, it is also possible to use with an open broad tank.

Reliable system of protection of the house against freezing.

The heat exchanger from stainless steel, in comparison with copper, by 20 times reduces probability of corrosion that considerably increases the term of its service. Heat exchanger efficiency from stainless steel much more, than at copper that allows to receive much more hot water.

The area of heating is up to 160 sq.m. GVS - 8,6l. in a minute, a m3 gas 0.9-1.7 consumption in an hour.

1. The broad tank of 8 l, the circulation pulser, pressure valve from 3 kg/cm2, the air dumping valve, the water pressure manometer in system of heating are built in a copper
2. In a set the wire remote control of management (wire length to 15 m is allowed)
3. A combustion chamber - closed with a turbo-supercharging, an extract compulsory

It is specially adapted for use with our water.