Glanz™ Option 2 for clearing of the heat-exchanging equipmen
- Customer pickup,
- In detail
- Country of manufactureRussia
Means is intended for derusting from metallic surfaces, and also scum and mineral deposits.
RANGE OF APPLICATION
Heat power industry: cleaning of internal walls of the heat - exchanging equipment (pipes, coppers, heat exchangers) of scum and other mineral deposits.
· The high - speed highly acid concentrated detergent;
· contains corrosion inhibitor;
· contains the antiseptic agent interfering further education of deposits;
· vodorastvorimo, it is biodegradable, fire and explosion - proof; the concentrate can "soar".
At observance of recommendations about application does not make negative impact on the processed surfaces.
Concentration of working solution is defined by extent (thickness) of deposits. Means is effective both in cold, and in hot (but no more than 60 ºС) water.
Processing is carried out by circulating way:
- to prepare working solution of necessary concentration;
- to fill with solution the cleared capacity or pipe;
- whenever possible to provide circulation;
- to carry out process to full dissolution of deposits;
- to define result visually: termination of gas generation and foaming,
- to carefully wash away working solution from the cleared surface pure water;
- to repeat processing if necessary.
Approximate concentration of working solution are given below in the table.
Look/extent of pollution
|The recommended concentration of working solution, %||Quantity of concentrate for receiving 10 l of working solution|
|Very strong (scum, rust, limy raid, mineral deposits, etc. )||1 - 3||0,1 - 0,3l|
The final choice of necessary concentration of means of Glanz™ Option 2, working solution, necessary for preparation, remains for the USER who chooses it proceeding from specific conditions of application.
mix of mineral acids, corrosion inhibitor, indicator.
physical and chemical SVOYSTVA
Appearance: transparent colorless liquid.
Density: 1,11 - 1,14 g/cm3
rn 1% solution: 1,0 - 1,5
Carefully, contains acid! To follow safety rules during the work with acid detergents. At cultivation means to pour into water. To use rubber gloves, apron.
At passages - to neutralize soda.
At hit in eyes, on skin it is plentiful to wash out running water with soap, then 1 - 3% solution of baking soda.
More than 5% not to use working solutions with concentration of means on non - ferrous metals and aluminum in order to avoid surface damage (concentration previously to check less than 5% on small site).
Not to mix with alkalis. To protect from children.