- Country of manufactureRussia
Glue 88 - CA is intended for gluing by cold way of rubbers on the basis of general - purpose rubbers, the polyisobutylene plates of PSG to different materials
Glue 88 - CA represents solution rubber mix and phenolformaldehyde pitch in ethyl acetate mix with nefrac.
Viscous colloidal solution, color from gray - green to beige.
It is homogeneous on consistence. Sludge formation is possible.
|Mass fraction of solid residue of glue||24±3%|
|Funnel viscosity on the VZ - 246 viscometer||10 - 40 with|
|Anchoring strength of 56 rubber with steel of Art. 3 or aluminum alloy:|
|In 24 hours after pasting|
|- when flaking||not less than 2,31 (2,36) N/mm (kgf/cm)|
|- at separation||not less than 1,09 (11,0) MPas (kgf/cm2)|
|In 48 hours after pasting|
|- when flaking||not less than 2,60 (2,64) N/mm (kgf/cm)|
|- at separation||not less than 1,39 (14,20) MPas (kgf/cm2)|
The products which are stuck together by Glue 88 - CA (with sealing of end faces and edges), can be operated in sea and sweet water, and also in the environment of air, at temperature from - 50 to + 60 °C.
Glue 88 - CA does not cause corrosion of steel and aluminum alloys, does not form toxic connections in the air environment.
- Storage and application
Glue shelf - life — 6 months in hermetically closed container at temperature from 0 to 20 °C in the special room intended for storage of flammable materials.
Glue 88 - CA is applied to gluing by cold way of rubbers on the basis of general - purpose rubbers, the polyisobutylene plates of PSG to metals, glass, concrete, tree, rubber and other surfaces.
Plastic barrels on 50 liters, capacity 39 - 45kg.