- Country of manufactureKazakhstan
the modified bitumen, solvent, softener and a filler.
It is made with use of the special solvent which is not dissolving
expanded polystyrene. Does not contain toluene and other toxic solvents.
Features
Provides an additional waterproofing of the heatisolated surface. Convenience in work, does not demand carrying out hot work, is not afraid of negative temperatures.
It is recommended by the leading producers of extruded expanded polystyrene.
| Characteristics | |
|---|---|
| Time of a skhvatyvaniye of the gluing layer at 20? With, h | no more - 48 |
| Mass fraction of nonvolatile substances, % | not less - 60 |
| Temperature of a softening of the dry rest? With | not less - plus 90 |
| Durability of coupling with concrete, MPa | not less - 0,5 |
| Durability of coupling with metal, MPa | not less - 0,5 |
| Average expense | 0,5 l/m of kV |
Application
Works:
The prepared surface has to be equal and dry, not have the acting fittings, sinks, flows, chips, edges, oil spots, dirt, a rust, dust, ice, snow and water. For achievement of the best result, the surface has to be an ogruntovana a bituminous primer of "Bitumast". The metal surface needs to be cleared of a friable and bedded rust mechanical cleaning and it is recommended to process the Bitumast rust solvent. To use glue at ambient temperature not below minus 5 °C and lack of rainfall, for works at a negative temperature, glue is recommended to be warmed to room temperature. Glue is applied on a surface with an even continuous layer the ordinary or edge pallet. Then, on an educated glue layer, heat-insulating plates keep within. As necessary (for example, at strong wind), before fight of glue connection, fixing is required by temporary props at a vertical arrangement of sheets, and at a horizontal arrangement of sheets - superficial loading of plates.
Storage:
To store in densely closed container at a temperature from minus 30? With to plus 50? S. Predokhranyat from influence of moisture and direct sunshine, far from heating devices and open sources of fire. Not to store in premises and in contact with food. To keep in the place, inaccessible for children. A warranty period of storage on condition of tight packing - 24 months.
Precautionary measures:
Not to use in the inhabited and closed rooms. Glue for extruded expanded polystyrene is flammable! To carry out works with glue in the open air, during the work indoors it is necessary to provide forced ventilation, not to smoke. To exclude existence of heating devices and open sources of fire. Not to allow hit of glue on integuments, in eyes and a gullet, to apply protective suits, gloves and points. At hit of glue on skin - to remove with rags and to wash away pollution by soap water. At hit of glue in eyes - to wash out a large amount of flowing water and if necessary to ask for medical care.