- BrandAlinex
- Country of manufactureKazakhstan
- Weight25 kg
It is intended for fastening of gypsum plasterboards, decorative elements and ceramic tiles to the concrete, brick and plastered bases. For use in dry rooms.
Packing and storage
Paper bags on 25 kg. Not to allow moisture hit. To use the opened bags first of all. The warranty period of storage in an original packing in a dry form makes at least 12 months. To store at a temperature of - 30 s + 40C and relative humidity up to 80% .
Preparation of a basis
The bases have to be strong and rough. Polluted by fats, oils, paints and other similar substances, and also fragile sites of a surface need to be removed in the mechanical way. Roughnesses and hollows should be leveled previously plaster solution. The age of the plastered cement bases by the time of drawing AlinEX "UNIFIX" has to be not less than 28 days. Previously to process the Silnovpityvayushchy (porous), concrete plastered surfaces the deep - getting primer of AlinEX "PRIMER".
Solution preparation
To mix dry mix by means of the electric drill to mix with clear water of room temperature before receiving homogeneous mass. Mix is ready to application in 5 minutes. A ratio when mixing: on a bag of dry mix weighing 25 kg 8,3 - 9 liters of water are required. Overdose of water causes decrease in strength characteristics of mix. Before use once again to mix. To use the prepared portion within 60 minutes. The solution which began to harden should not be applied further.
Method of application
To plain surfaces gluing is carried out by drawing thin continuous strips by means of the gear pallet on perimeter and one - two strips in the middle of a leaf. To uneven surfaces - by putting glue on perimeter and in the middle of a leaf by means of a trowel small groups through every 30 - 35th. In places where freight will be suspended, to apply glue on all surface of a leaf. To attach the sheet of gypsum cardboard to the prepared basis, to modify its situation and to press strongly. In the same way to establish the second leaf, controlling coincidence of the plane to the plane of earlier established leaf, etc. It is impossible to leave emptiness in seams, otherwise after a shpatlevaniye on the place of a joint cracks can be formed.
Final processing
Next day after the end of installation of HL to process seams a special zatirka for seams of AlinEX "JOINT".
Symbol | Mix dry rastvorny, glue for HL, plaster, M50, Pk2 of ST 35715 - 1910 - limited liability partnership - 01 - 2011 |
Color | white |
Binding | plaster |
Water resistance | not waterproof |
Maximum fineness of a filler | 0,315 mm |
Ratio when mixing | on 25 kg of dry mix 8,3 - 9l of water |
Material consumption | about 3 - 4 kg on 1 sq. m at a thickness of layer of 3 - 4 mm |
Application temperature | from + 5os to + 30os |
Viability of solution | 60 minutes after mixing with water |
Material class, specific effective activity of ERN (Aeff), no more | 370 Bq/kg |
Durability of coupling with the basis, not less | 0,5 MPa |
Durability on compression, not less | 5 MPas |
Brand on durability | M50 |
Drying time | about 24 hours at + 20os |
Indicators are given for relative humidity 50% at a temperature + 25ºС. |