- BrandHermes Trade
- Country of manufactureKazakhstan
Hana Red nozzles 26 – 39 HPs
Gas nozzles of Hana Single Red 26-39 HP are manufactured in South Korea on the latest equipment with use of modern technologies. Are selected depending on car engine capacity.
Article: No. 39
Description
Gas - nozzles - Hana - Single - Red-26-39 - HP - are manufactured in South Korea on the latest equipment with use of modern technologies. Are selected depending on car engine capacity. - Gas nozzles - Hana - to buy - which - it is possible at us in online store, - will cope with fuel even of poor quality, completely conforming to the Euro-4 standards, Euro-5. The producer – - Hana - Engineering - Co.Ltd. - the Guarantee for nozzles makes 12 months though it should be noted that marriage percent very low. Are capable to use also propane, - and methane. 4 generations are applied in the GBO systems.
Nozzles - Hana - series - Single - are intended for single installation - and connect to the help of special distributors. Distributors happen the 3rd and the 4th cylinder. Such installation is effective, - because nozzles can be established very close to a collector. The it is less than a distance from a nozzle to an inlet collector - the more precisely gas supply. This parameter very much influences dynamics of the car on gas. Process of opening and closing of a nozzle carries out a rod therefore - Hana-nozzles of shtokovy type.
High speed of opening and closing became possible thanks to the low resistance of coils (1,9 Ohms) and special materials of which the nozzle consists.
Features:
-
Very low noise level thanks to rubber laying with a special covering -
-
Very high precision thanks to installation it is close to a collector -
-
Very high resource - works -
-
Low interest of marriage -
-
The increased piston durability -
-
Support of nozzles many known systems of injection -
-
For cars with a power from 26 to 39 horsepowers at 1 the cylinder -
-
Novelty! Special brass in twists which are capable to increase or reduce diameter of output section. This function allows to reduce probability of the wrong selection of a nozzle for power.
Nozzles - Hana - red have the brass union of gas discharge with a diameter of 2,4 mm. Gas discharge from a nozzle on the union sprays by means of 5 mm of a gas hose. A gas input in the distributor for nozzles – 12 mm a hose. Hoses press out collars. The socket under electronics - European - Valtek. Capacity - nozzles – 90 liters a minute. Overall dimensions – 70х25 mm.
Opening and closing of a nozzle:
-
Resistance of 1,9 Ohms: 2,24 ms / 1,2 ms -
-
Resistance of 3 Ohms: 2,7 ms / 1,2 ms.
Closing-time of a nozzle |
1.2 ms |
Time of opening of a nozzle |
2.7 ms |
Guarantee |
12 months |
Pressure is working |
300±-50 kPa |
Maximum current |
2.0 |
Maximum pressure |
3.5 bar |
Power (4 cylinders) |
104-156 h.p. |
Power (6 cylinders) |
156-234 h.p. |
Power (8 cylinders) |
208-312 h.p. |
Gas stream |
90 liter/min. |
Working temperature of nozzles |
From-40 to +125 ° - With |
Resistance of coils |
1,9 Ohm ±-0,1 Ohm |
Temperature of storage of nozzles |
From-40 to +135 ° - With |