Highlighter of strips of public transpor

Appointment: The Highlighter of Strips of Public Transport (HSPT) is intended for allocation of lanes of public transport (buses and trolleybuses) on streets and avenues.

Work is carried out for optimization of the mode of traffic in the city, creations of priority lanes for the means of transport stated above.

Description of functions: The product "VPOT" is intended for:

• allocations of lanes of city public transport;
• compulsory differentiation of the streams of road transport moving in the opposite or adjacent directions;
• redirections of streams of motor transport;
• branchings of a stream of cars before the repaired site;
• designations of an entrance to the dangerous place (the bridge footing, a tunnel, etc.)
• installation for division of parking spaces on parkings, restrictions of lateral strips on dirt roads, outcomes, at settlements is also possible (in public places — shops, gas stations, schools).

Description of a product: The highlighter of strips of public transport is made two types (collapsible and monolithic) and represents a protective element.

Monolithic VPOT represents a product from rubber of black color * various classes depending on service conditions. Overall dimensions 500kh150kh60mm. In the deepenings located on a surface the reflecting tape of yellow color is pasted.

The central segment represents a monolithic product from rubber of black color * various classes depending on service conditions. Overall dimensions of a tsentraljny segment 500x 150khb0mm. In the deepenings located on a surface the reflecting contribution of yellow color is pasted.

Lateral segments (left and right) represent a monolithic product from rubber of black color * the sizes 175kh150kh60mm.

Range of operation lies in the range of air temperatures from -40 °C to +70 °C.

Principle of action and installation: Is established as an integral strip, and with intervals, at the request of the customer. The VPOT segments settle down on the earth, asphalt and are fastened among themselves by means of castle fastening "larkspur". On an asphalt covering openings under blockage of expansion bolt shields or anchor sleeves are marked. By means of electro-or the pneumopuncher the marked openings brown Ø15 of mm on depth of 150 mm zasverlivatsya, previously having shifted a collected design from an installation site. To hammer into zasverlenny openings of the expansion bolt shield or anchor sleeves. To move a collected design on an installation site. To tighten a collected design self-tapping screws or anchor bolts.