Highly filled covering of floor Tsp_new
- Customer pickup,
- Courier
- In detail
- Country of manufactureKazakhstan
- Anti-slip propertiestYes
- AntistaticityYes
Highly filled covering Tsp_new
Highly filled smooth decorative covering. (4.0-7.0mm)
Application: The decorative covering of a floor maintaining mechanical influences of moderate intensity at the movement of wheel transport on rubber and plastic to the course, pedestrians and carts on rubber and plastic to the course and also chemical influences of water, fuels and lubricants, acids and alkalis of average intensity. It is resistant to shock influences, shift loadings. Partially levels the basis.
| № | Operation | Material | Expense
kg/sq.m |
Tool,
way |
| 1. | Primer | Ризопокс™ - 1100 | 0.3 ¸ 0.4 | The roller resistant to solvents with pile length the 8-12th |
| Powder | Color quartz Rizodek™ sand.
Fraction 0.8 ¸ 1.4 mm |
0.5 ¸ 0.6 | Manually
The fraction of sand for powder is appointed similar to fraction of sand in the main mix |
|
| 2. | Power layer
(epoxy peschannaya mix) |
Color quartz sand of the Rizodek™ brand, 0.8 ¸ 1.4 mm
Ризопокс™ - 1605 in the ratio 12:1 (on weight) |
6.8 ¸ 11.9
(4 ¸ 7 mm) (general expense) |
Metal rakel-scraper
with an adjustable gap or "Skrid-boks" |
| Zatirka of mix | G-Combi car
with blades or manually metal trowel |
|||
| 3. | Impregnation | Ризопокс™ - 1605 | 0.4 ¸ 0.91 | The rubber pallet or the roller with long pile the 15-18th |
| 4. | Zapechatka | Ризопокс™ - 1605 tix * | In 2 layers with the general expense 0.4 ¸ 0.5 | Metal (or rubber) pallet "on sdir".
Not to allow pools and flows. |
| 5. | Finishing layer | Polyurethane
opaque varnish Ризопур™-1520W |
0.05 ¸ 0.1 | It is put velors
roller. To watch uniformity of an expense (layer thickness). |
| TOTAL | ||||
Note: * to pay special attention to an expense and uniformity of drawing Rizopoks™-1605T. Not to allow drawing by a thick layer, formations of pools and potek, otherwise there can be a yellowing of a finishing layer under the influence of a sunlight. In need of higher light resistance to use the material Rizopoks™-1606T as a finishing layer.
1 - For loadings of bigger intensity it is necessary to appoint the raised impregnation expense. The expense is also corrected depending on quality of a zatirka.
General thickness: 4.0 - 7.0mm