Installation, design and production sandwich of panels
Aziash LLP makes panels three-layer wall and roofing with a mineral-cotton heater on a basalt basis, and also, with a polystyrene foam filler.
Description
Sendvich-paneli-it is the modern construction material possessing unique qualities: low heat conductivity, fire resistance, ease of installation, the smallest expenses at construction and esthetics.
The sandwich panel is done possible by simple and fast installation and dismantle of buildings of any area, with the minimum expenses. It is easy to replace any panel in case of damage. A sandwich panel are durable (service life not less than 25 years), possess high anticorrosive resistance.
There are two main types of panels - wall and roofing.
tenovy a sandwich of the panel possess a smooth surface with a superficial profile. The walls constructed from a sandwich of panels have attractive appearance and do not need additional finishing. The wide color gamut allows to carry out various color schemes and combinations.
Roofing a sandwich of the panel have a high profile thanks to which the drain and the increased rigidity is provided.
The roof and walls executed with use of "sandwich" panels completely meet the technical and functional requirements imposed to the protecting designs.
Structure three-layer sandwich of panels
Filler the sandwich panels serves more often expanded polystyrene or a mineral-cotton plate on the basis of basalt fiber.
Mineral-cotton plates are the fibrous material received from fusion of rocks of basalt group on synthetic binding. The main property of mineral wool distinguishing it from other heat-insulating materials is its incombustibility, and also high thermal and sound-proof characteristics, chemical and biological firmness, environmental friendliness. Working width wall three-layer a sandwich of panels with a filler from a mineral-cotton plate of 1200 mm, and the working width of roofing panels – 1000 mm.
Expanded polystyrene – the environmentally friendly material possessing low heat conductivity and small weight. Differs in the high durability, chemical firmness and durability. Important property of expanded polystyrene is its ability to bear considerable loadings for a long time.
Expanded polystyrene does not support process of burning without contact with an open flame as is the self-fading material. Small weight a sandwich panels with a polystyrene foam filler facilitates installation. When there is a construction a panel sandwich with polystyrene foam filling significantly facilitate installation.
Working width wall three-layer a sandwich of panels with a filler from mm expanded polystyrene 1200, and the working width of roofing panels – 1020 mm.
Thickness of panels is 50-80 mm, length of panels is from 2 to 12 m, thickness of the steel galvanized sheet of facing of 0,5 mm. Facing is stuck together with a filler polyurethane glue by method of hot pressing.
Wall and roofing differ in density of a filler and geometry of a profile. For roofing a sandwich panels density of a filler has to be 1,5 times more, than for wall.
Thickness of thermal insulation is chosen depending on appointment and conditions in which the building will be operated.
High heattechnical characteristics
The sandwich panel is surpassed by traditional construction materials in heat-insulating characteristics at 10-15 times. Also at a sandwich panels very high rates on sound insulation.
Small weight
Pressure a sandwich panels on the base is tens times lower, than a brick or concrete.
Convenience and short deadlines of installation
As a sandwich panel differ in small weight, at construction of constructions the difficult equipment for their loading, unloading and rise is not required.
Profitability
Construction of buildings from a sandwich panels is more economic than construction of buildings from traditional materials (a brick, concrete). The economy turns out due to reduction of terms of construction, costs of pure finishing (a sandwich panel - elements of full factory readiness), expenses on heating and repair at operation of the building.
Possibility of dismantle of constructions
If necessary the building from a sandwich panels can be subjected to fast dismantle and transportation on other place.
Durability
Sealant, used in a sandwich panels, are not deformed over time, and external layers of panels perfectly resist to the natural phenomena. Thus, constructions from a sandwich panels can serve more than 20 years.
Esthetic appearance.
Sandwich panel have almost ideal plain surface and do not demand additional finishing.