- BrandМЕДИТЕК «Знамя Труда
- Country of manufactureRussia
Power of the Baltner installation is 30 l. – 8 kg. waste in an hour.
Power of the Baltner installation is 50 l. – 12 kg. waste in an hour.
Principle of work. Purpose of the equipment for utilization of medical waste of "BALTNER"
This equipment is intended for utilization of medical waste of classes B and B by thermal disinfecting (disinfection by saturated water vapor under pressure in the conditions of vacuum) with the subsequent mechanical destrukturization in the way of pressing to briquettes in a mechanical press as a result waste of a class B and B becomes waste of a class A and is taken out on solid waste landfills. This method provides full disinfecting of all types of medical waste and deprivation of structural properties by them that completely corresponds to Sanitary and epidemiologic rules and standards 188.8.131.5290-10. regarding thermal disinfecting and a destrukturization of commodity properties.
The BALTNER technology processes all types of solid medical waste:
- Products from plastic (syringes, probes, filters, deflyuzor, catheters, capacities and so forth)
- Glass (bottles, bottles, test tubes, ampoules, ave. pipettes)
- The small metal tool (including needles of syringes, lancets, scalpels, razors)
- Products from latex, cellulose, rubber, paper, a cardboard, a tree and fabric
Advantages of the BALTNER technology
- Reliability and simplicity in operation.
- Low cost of the equipment
- The minimum requirements to the room for installation of the equipment (existence of the socket 220B,50A,3 of kW, existence of the sewerage for water discharge)
- The equipment by delivery is completely ready to work and demands only connection of the electric power
- Possibility of the manual gulf of water
- The maximum loading of a chamber to 50 liters.
- Possibility of processing of any kinds of solid medical waste. Does not demand additional subsorting of waste before a processing cycle.
- The removable lateral panel for inspection of the main knots in the course of work.
- Compactness. (Cm D140*Sh46*V120)
- Decrease in costs of MPI of system of the address with medical waste on average for 44%
The line of the equipment for utilization of medical waste allows to satisfy requirements of all existing types of MPI: BALTNER-30 is applicable for small MPIs such as policlinics, female consultations, sanatoria and a dispensary, the private medical centers. BALTNER-50 – for averages and large versatile hospitals.
Requirements to the room for placement of installation for disinfecting and utilization of medical waste "Baltner".
- existence of a network of the electric power of 220 W, 50 Hz, with grounding.
- existence of the sewerage for water discharge.
- temperature condition of the room: from +5 to + 30 degrees.
- ventilation: prevalence of an extract over inflow. At room space more than 20 m ² balance of an extract and inflow is possible.
- the minimum land area taking into account space for storage of waste - 12 m ²