INSTALLATIONS COMPRESSOR KR-2 AND AKP-2
- Customer pickup,
- Courier
- In detail
Are INTENDED FOR: forcings of air in cylinders and maintenance of pressure from 80 to 150 kgfs/cm2 in them in manual (KR-2) and automatic (AKP-2; AKP-21; AKP-22; AKP-23) modes.
ARE APPLIED:
- for start of diesel electric units;
- for providing industrial facilities with compressed air;
- as a part of oil drilling installations.
Installation consists of the three-stage compressor put in action by the electric motor through klinoremenny transfer. Greasing circulating under pressure from the gear pump. Cooling is liquid, on the closed contour.
THE SYSTEM OF AUTOMATIC CONTROL AND PROTECTION OF INSTALLATION PROVIDES:
- start-up at pressure decline in system to 80 kgfs/cm2;
- a stop at achievement of pressure in system of 150 kgfs/cm2;
- an emergency stop at:
a) excess of air temperature;
b) increase of pressure of air in system to 170 kgfs/cm2;
c) pressure decline of air in system to 60 kgfs/cm2;
d) pressure drop of oil is lower than admissible size.
TECHNICAL CHARACTERISTICS
Designation of a product | Pressure | Productivity | Frequency of rotation of a shaft of the compressor, rpm | Weight, kg | Overall dimensions, mm | Completeness of delivery | ||
Initial, kPa | Final superfluous, kgf/cm2 | Under the terms of absorption, m3/min. | On compressed air, l/min | |||||
KR-2 | atmospheric | 150 | 0,3 | 1,8 | 1000 | 335 | 1400х740х890 | Without devices of automatic equipment and a portable control panel |
AKP-2 | atmospheric | 150 | 0,3 | 1,8 | 1000 | 375 | 1450х720х890 | With the device of automatic equipment and a portable control panel |
AKP-21 | atmospheric | 150 | 0,3 | 1,8 | 1000 | 375 | 1450х720х890 | With automatic equipment device, without portable a control panel |