(View map)
- BrandKazstanex
- Country of manufactureBulgaria
Edge thickness: 0,4-3 mm, panel Thickness: 10-45 mm, giving Speed: 5 m/min.
The machine is intended for processing of edges of direct surfaces, with their automatic giving. Glue is applied on a preparation edge in the direction of preparation. Are used for edges with thickness from 0,4 - mm to 3,0 - mm and thickness plates from 10 - mm to 45 - mm. Automatic cutting of sves in two ends of plit and removal neispolzvayemy part an edge above and below the processed plane. There are digital indicators on the entering ruler, on the milling cutting device and on the giving device for control on height, the electronic regulator of temperature of glue with the microprocessor and tsifrovyym the thermometer, a mobile enlarging support for a fringing of the wide planes and a regulator of hot air.
- -| Technical characteristics | |
|
Sizes of a desktop, mm |
1400 - 600 - - |
|
Sizes peredny / zadny udlinelny table, mm |
400 - 380 - - |
|
Thickness of the plane, mm |
10 - — - 45 - |
|
The sizes on the processed plate (minimum), mm |
300 - 90 - - |
|
Speed of giving of a car the giving device, m/min |
5 - |
|
Support under Roel with Ø-600 edge - |
- |
|
The cutting circular disks – 2 - br., mm |
|
|
Turns of face knot, min-1 |
9000 - |
|
Milling heads – 2 - br., mm |
|
|
Turns of the milling module, min-1 |
9000 - |
|
Diameters tips for aspiration, mm |
|
|
Total power of heating elements, kW |
1.260 - |
|
Total power consumption, kW |
2,400 - |
|
The feeding tension, (3 - a phase), V |
380 - — - 440 - |
|
Frequency of current, Hz |
50 - |
|
Pressure of compressed air, Bar |
6.5 - |
|
Weight of the machine, kg |
410 - |
|
Neobkhodimaya Square, m |
2х3.5 - |
-
- -| Technical characteristics | |
|
Sizes of a desktop, mm |
1400 - 600 - - |
|
Sizes peredny / zadny udlinelny table, mm |
400 - 380 - - |
|
Thickness of the plane, mm |
10 - — - 45 - |
|
The sizes on the processed plate (minimum), mm |
300 - 90 - - |
|
Speed of giving of a car the giving device, m/min |
5 - |
|
Support under Roel with Ø-600 edge - |
- |
|
The cutting circular disks – 2 - br., mm |
|
|
Turns of face knot, min-1 |
9000 - |
|
Milling heads – 2 - br., mm |
|
|
Turns of the milling module, min-1 |
9000 - |
|
Diameters tips for aspiration, mm |
|
|
Total power of heating elements, kW |
1.260 - |
|
Total power consumption, kW |
2,400 - |
|
The feeding tension, (3 - a phase), V |
380 - — - 440 - |
|
Frequency of current, Hz |
50 - |
|
Pressure of compressed air, Bar |
6.5 - |
|
Weight of the machine, kg |
410 - |
|
Neobkhodimaya Square, m |
2х3.5 - |
-
|
SPECIAL ORDER: |
-
|
Support under Roel with Ø-800 edge - |
|
The device for movement of the machine |
