Lamp luminescent industrial Aquq-1
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandVyrtych
- Country of manufactureCzech Republic
- Protection ratingIP68
- Type of switchPush button
- BaseG5- G13
Description
Lamp luminescent industrial Aquq-1
Application: places with high degree of protection of IP against influence of dust, water and at immersion in water to 20 m - washing installations, tanks, pools and chemical industry
Basis: The lamp basis, is a polycarbonate, transparent tube with a diameter of 70 mm which thickness of a wall has 4 mm. It provides excellent mechanical firmness against blow. Degree of combustibility of this material B (difficult combustible). The tube can be put also from borosilicate glass (for chemical industry), or diffusive polymethyl methacrylate. The tube is ended by the condensing stopper with input of M20.
Reflector: The reflector which is difficult from two aluminum shapes is enclosed in a basis of the lamp. On it the electric equipment is also attached.
Electric equipment: Lamps are standardly equipped with inductive or electronic PRA, three or five a polar klemmnik, and socles, lamps of G5 or G13.
System of fastening: Lamps fasten by means of special couplings and four screws to a ceiling or on a wall. It is possible to suspend them by means of a cable and self-tightening suspensions or by means of a chain and an earring too.
Application: places with high degree of protection of IP against influence of dust, water and at immersion in water to 20 m - washing installations, tanks, pools and chemical industry
Basis: The lamp basis, is a polycarbonate, transparent tube with a diameter of 70 mm which thickness of a wall has 4 mm. It provides excellent mechanical firmness against blow. Degree of combustibility of this material B (difficult combustible). The tube can be put also from borosilicate glass (for chemical industry), or diffusive polymethyl methacrylate. The tube is ended by the condensing stopper with input of M20.
Reflector: The reflector which is difficult from two aluminum shapes is enclosed in a basis of the lamp. On it the electric equipment is also attached.
Electric equipment: Lamps are standardly equipped with inductive or electronic PRA, three or five a polar klemmnik, and socles, lamps of G5 or G13.
System of fastening: Lamps fasten by means of special couplings and four screws to a ceiling or on a wall. It is possible to suspend them by means of a cable and self-tightening suspensions or by means of a chain and an earring too.
Contact the seller
Lamp luminescent industrial Aquq-1