(View map)
The mammography MX-300 system is the modern system intended for research of mammary glands at women in standard and slanting projections with function of increase in the image (option) and a possibility of carrying out a biopsy (option). Provides unsurpassed quality of the image and has lungs in management of function.
- Stable capacity thanks to invertor system of the generator
- Microprocessor automatic control of exposure
- Automatic removal of a compression after exposure
- High-quality X-ray tube with two focuses
- High sensitivity of the eliminating raster
- 19 steps of density of pressure
- 2 exact collimation formats
Features
- The generator of X-ray equipped with high-frequency invertor system provides the high level of an output signal, high efficiency of system and stable radiation.
- In a magnifying X-ray analysis (x1.5, h1.8) uses the microfocal X-ray tube promoting the increased diagnosing accuracy. (option)
- Microprocessor automatic control of exposure (AES) provides an opportunity to do high-quality pictures irrespective of type of a film and screens. Also serves for optimization of contrast and for recognition of characteristics of a mammary gland.
- The modern type of the AES function allows to regulate automatically tension on the anode (Auto-kV).
- Thickness and density of the squeezed mammary gland are defined, optimum tube tension automatically is established.
- It is possible to adjust position of the sensor of system of automatic control of exposure. (3 different situation). It allows to establish an optimum position for the sensor of system of automatic control of exposure according to the direction of a projection.
- There is a possibility of the choice between the big and small size of the sensor of system of automatic control of exposure according to the size of a mammary gland.
- Possibility of automatic control of a position of the sensor of system of automatic control of exposure according to the S-arch angle of rotation (the direction of a projection).
- Compression pillow for a biopsy with 1 opening (option)
Technical characteristics of the mammography MX-300 system
|
Name |
Parameters |
|
Generator |
|
|
Type |
High-frequency inverter |
|
Radio graphic data |
Big focal point 22-35kv, 1-600mAs Small focal point 22, 1-100mAs |
|
Controller |
|
|
Type |
Microprocessor control Digital display Transistor detector |
|
Modes |
Manual and microprocessor automatic control of exposure (AES) |
|
Installation of a voltage |
22-35 kV |
|
Detector |
Diode |
|
Density |
19 steps |
|
X-ray tube |
|
|
Type |
Beryllium body Molybdenic tube with the rotating anode |
|
Size of a focal spot |
0,3/0,1 mm |
|
The rotating anode |
300 KHU |
|
Angle of sight |
16 degrees |
|
Filtering |
Beryllium body 0,63 mm thick |
|
Anode material |
Molybdenum |
|
Filter |
|
|
Types |
Molybdenum |
|
Inclusion method |
Automatic inclusion at installation of a voltage |
|
Radio graphic stand |
|
|
S-arch |
Vertically 560-1340 mm Turn to the right 180 ˚, to the left 160 ˚ |
|
Compression |
Manual and motor (at most 18 kg) (Micom controlled compression Automatic or manual release |
|
Distance from a floor to a x-ray table if the C-arch is on 0 ° |
560 mm ~ 1340 mm
|
|
Distance focus film |
600 mm the fixed distance |
|
Compression mechanism |
|
|
Type |
Electric and manual compression |
|
Blocking |
Mechanical blocking |
|
Mask of restriction of a beam |
|
|
Type |
The field of radiation is limited to masks , as shown below 18x24 cm |
|
Vertical stand |
|
|
Cartridge size |
18х24 cm (option) |
|
Modulator |
The making back and forth motion 4:1 91 lines |
|
Electric characteristics |
|
|
Current |
1 phase, 50/60 Hz |
|
Power |
THE EXPERT 220-220 IN |
|
Service conditions |
|
|
Room temperature |
5 ~ 40 °C |
|
Air pressure |
70 ~ 106 kPa |
|
Weight |
300 kg |
