Important: We indicated the cost of the machine without rollers, and which rollers are needed is chosen by the client himself (without imposing unnecessary rollers / options). The cost of the videos is listed below.
Manual machine for profile or strip rolling. It is based on a block consisting of a collapsible welded body, gears, bearings and shafts. For ease of installation and dismantling, places for installing replaceable rollers are placed on the side of the block. It is not difficult to change the rollers, the shafts have a keyway, fixation for a bolt with a washer. The machine works in manual mode (the handle is included), it can also be hooked up to the electric drive through the output shaft (30mm).
Full possible functionality of the machine:
1) Decorative rolled profile
2) Rolled U - shaped (reinforcement of a professional pipe)
3) Clamp strip rental
|Machine body:||Welded collapsible design|
|Landing shafts for rollers:||diameter 30 mm|
|Possibility to change equipment:||Yes|
|Replaceable rollers for strengthening the professional pipe:||yes ( purchased separately )|
|Profile sections for reinforcement||10, 15, 20 mm (thickness no more than 1.5 mm)|
|Gain texture:||U - shaped|
|Replaceable decorative rolls :||yes ( purchased separately )|
|Profile sections for decor rolling:||15x15, 20x20 (thickness no more than 1.5 mm)|
|Replaceable clamp strip rollers :||yes ( purchased separately )|
|Sections of the strip for rolling:||1.5 x 18, 1.5 x 23 mm|
|The weight:||18 kg|
1) Strengthening the profile pipe (10x10.15x15.20x20 mm) - 6,000 rubles.
2) Decorative rolling of a profile pipe - 6,500 rubles. (price per set/pair for one profile section with one texture, for example profile 20 * 20 with "star" texture).
3) Rollers for creating a collar strip - 9,000 rubles.