Currency KZT
Material of Bikrost of HKP buy in Almaty
Buy Material of Bikrost of HKP
Material of Bikrost of HKP
material_bikrost_hkp

Material of Bikrost of HKP

In stock
Price:
5700 KZT
Shipping:
Seller
Kazakhstan, Almaty
(View map)
Products of other enterprises
Technical characteristics
  • Country of manufactureKazakhstan
Description

Bikrost is a modern waterproofing covering of economy class which is made by drawing on not decaying basis (fiberglass usual or punched, fiber glass fabric) of the special knitting substance on the basis of the oxidized bitumen.


Bikrost make with coverings of two types:

  • The polymeric film - is applied to a waterproofing or use for the lower layers of a roofing carpet.
  • Coarse-grained topping - use mainly for the top layers of a roofing carpet. As topping use mainly slate, sand or asbagal.


Bikrost To it is applied to the device of the top layer of a roofing carpet. Coarse-grained topping from the face protects material from influence of sunshine.

Bikrost P it is applied as vapor barrier at the device of a roofing carpet (the lower layer of system). As a protective layer of material fine-grained topping or a film can be used.

Material of Bikrost can be used in all climatic areas (according to Construction Norms and Regulations 23-01-99 *).

Features

Thanks to several types it can be used as during repair, construction of buildings or various constructions, and also for a waterproofing of various designs like tunnels or bridges. It is built up by means of a specialized propane torch, a blowtorch, or technical phenol. In certain cases material can be pasted to the basis by means of specialized bituminous mastics on the basis of various polymers.

At observance of all recommendations about work with this material, it keeps the moisture-holding properties up to seven years.

Parameter Value Measurement unit
EKP TKP HKP EPP CHAMBER OF COMMERCE AND INDUSTRY HPP
Weight is 1 m ² 4,0 4,0 4,0 3,0 3,0 3,0 kg
Explosive force at stretching 343/- 700/700 294/- 343/- 700/700 294/- N
Flexibility temperature on a bar of R=25 mm 0 °C
Heat resistance, +80 °C
Roll size 10х1 10х1 10х1 15х1 15х1 15х1 m

Application

Bikrost it is pasted on a roof due to fusion of a bituminous layer. For this purpose it is the best of all to use a gas torch.

  • The roof of Bikrost demands existence of the firm and dry basis. For this purpose the cement coupler is cleared of garbage, dust and the remains of an old roof.
  • The surface needs to be progruntovat a primer or bitumen, divorced gasoline or nefrasy to liquid state. This structure coats all surface of a roof and is left until primer finally does not dry.
  • The waterproofing of Bikrost keeps within on a roof from below up.
  • The roll is rolled perpendicular to a bias, the necessary size of material then the roll comes down to the middle from two parties is cut off. After that direct installation of Bikrost begins.
  • The roll is warmed by a torch and gradually rolled on a roof by means of a hook. The melted bitumen layer reliably fixes material and a coupler.


It is strictly forbidden to go according to newly-laid Bikrost in order to avoid emergence of dents and violation of integrity of a covering.

  • The following roll is rolled above previous so that material blocked the lower layer on 10 centimeters. This distance is necessary for ensuring reliable connection of the top and lower strips.
  • All strips keep so within and pasted.


Laying does not represent difficulties at respect for the correct technology of work. If necessary the second layer of material by the same principle keeps within.

At observance of all councils for operation this hydroinsulator can serve up to ten years.

Storage

It is necessary to store rolls in vertical position in one row in the dry enclosed space with a temperature which is not exceeding-15 C. The favor from heating devices has to be not less than one meter.

Contact the seller
Material of Bikrost of HKP
Material of Bikrost of HKP
Shipping method
Compare0
ClearSelected items: 0