Minicomplex for granulation GTL-304D

Minicomplex for granulation GTL - 304D

Minicomplexes GTL - 304D

If you have waste from the main production, such as wood chips, sawdust, husks (peas, millet, buckwheat), corn stalks and cobs, grain straw or other vegetable waste, we recommend using them and getting additional income from this or saving on heating costs.

Start producing solid biofuel granulation . The scope of production depends on the amount of waste that you have. Mini - complex GTL - 304D, designed for the production of fuel pellets (pellets) with a capacity of 300 to 800 kg/hour.

The GTL - 304D minicomplex for granulation in the basic configuration consists of: 1 - a receiving funnel, 2 - a crusher with pneumatic loading, 3 - a storage hopper, 4 - a batcher, 5 - a mixer, 6 - a press granulator GT - 304D, 7 - a belt conveyor with scrapers, 8 - counterflow cooler GTO - 7x8 , 9 - sifter GTP - 1 , 10 - cyclone, 11 - fan, 12 - control systems , 13 - a block of filters, 14 - a single frame.

Raw material requirements:

Energy biomass must be previously cleaned of impurities and crushed to a fraction: grain straw 40 - 50 mm, wood up to 20 mm (3 - 4 mm thick) with a moisture content of 10 - 12% . Small raw materials (sunflower husks, buckwheat husks, rice, etc. ) are not crushed beforehand.

The main recommendations for the operation of the GTL - 304D mini - complex:

The use of high - quality components and materials allows the GTL - 304D to be operated at temperatures from + 5 to + 40 and relative humidity up to 80% .

To ensure the operation of the GTL - 304D, it is necessary:

- power supply 380V, 50 Hz, 90 kW -
- compressed air with a pressure of 4 - 6 atm. , 250 l / min -
— dry saturated steam pressure 3 atm.

For the production of solid biofuel GTL - 304D may additionally include the following sections:

1 - site for the preparation of raw materials (chipper, wood chipping machine or straw chopper GTIS - 1 , cleaning from impurities) -

2 - site for drying wet raw materials ( drying complex GTSK - 0.6/4 ) -
3 - area for accounting, packaging and storage of finished products.

The total area occupied by the GTL - 304 mini - complex in the basic configuration on a single frame: 4500x2200 mm.

Equipment specifications may be updated at the discretion of the manufacturer without prior notice.