Huter MP 50 is a fine solution of the problem of pumping of pure large volumes in short terms. This petrol centrifugal, self - soaking - up motor - pump perfectly copes with drainage of the flooded cellar, rooms, can carry out pumping of water from big capacities, pools or even reservoirs.
For implementation of such difficult operations the model is equipped with a powerful petrol four - cycle internal combustion engine on air cooling. Its power reaches 5,5 h. p.
And the Volume of working part makes 163 cubic see. It allows to support frequency to 3.600 revolutions per minute.
The known gasoline of the AI - 92 brand acts as fuel as everything. It is located in a fuel tank of 3,6 liters that provides long works.
In operating time the pomp can make absorption of water from depth to eight meters. And after that to lift water on height to 32 m. During all these manipulations of TTH support productivity at the level of 600 liters a minute. It means that in only 60 seconds such amount of water can be lifted from depth and is sent to the maximum height.
Durability of a design is given by a steel frame which bends around all case on perimeter. It positively affects the engine which cooling is natural.
The lower part of a welded frame plays a role of a support and promotes the correct distribution of weight. The mass of a motor - pump of Huter MP 50 makes 23 kg.
Advantages
- Pumping of water from 8 - meter depth;
- All details of a motor - pump of Huter MP 50 are made of high - quality materials;
- Manual starter;
- Silent work.
Main characteristics
| Producer |
Huter
|
| Weight |
23.0 (kg) |
| Type |
for clear water |
| Power, W |
4101 |
| Productivity, l/min |
600 |
|
| Country producer |
Germany |
| Warranty period |
12 (months) |
| Engine |
OHV |
| Height of rise, m |
32 |
| Diameter of an exhaust outlet, mm |
50 |
|
