Multi-saw disc machine SM-160 (electric motor 45 kW)
- Customer pickup,
- In detail
Machines of the CM - 160 series carry out sawing of double - edged bars of various widths and heights up to 160 mm, the distance between the extreme saws is 350 mm.
Machines of the CM - 160 series cut two - edged beams up to 160 mm high. Up to 10 circular saws with a diameter of up to 500 mm can be installed on the machines. When sawing timber of a lower height, you can use saws of a smaller diameter - this allows you to reduce the width of the cut and, therefore, increase the percentage yield of finished lumber. The saws have a speed of 2200 rpm. , which ensures the high quality of the resulting material.
The feed speed of the material has a three - stage adjustment: 4, 6, 9 meters per minute. Depending on the load on the saws, according to the readings of the ammeter, the optimal feed rate is set. This allows you to achieve such an operating mode in which the electric motor and saws work without overload in the optimal mode. As a result, the service life of the saws is extended and maintenance costs are reduced.
The gang saw can work together with a log saw to form a single production line, or independently as a second row machine.
The simple and reliable design of the SM - 160 machines allows you to work on them for a long time, with a consistently high quality of the products.
|Type of supply current||variable three - phase
|Current frequency, Hz||fifty|
|Used voltage, V||380|
|Length of processed material, mm, not less than||1200|
|Cutting speed, m/s, not less than||56|
|Rated feed rate, m/min||4, 6, 8|
|Number of saws, pcs. , no more||ten|
|Distance between edge saws, mm, no more||350|
|Saw diameter, mm, maximum||500|
|Nominal diameter of the landing neck for the tool, mm||fifty|
|Nominal distance from the floor to the working surface of the table, mm||820|
|Service rate, people||2|
|Worm gear||NRW - 0.75 \ 60|
|Number of electric motors, pcs||2|
|Electric motor of the main drive (saw shaft) rated power, kW||45|
|Rated speed, rpm||2950|
|Feed drive motor (feed rollers):
|Total power of electric motors, kW * AT SAW DIAMETER 500||46.1|
|Габаритные размеры станка
|Габаритные размеры столов (2 шт. в связке)