Multi - saw machines of the TsMD - 150 series produce sawing of two - edged beams up to 150 mm high, the TsMD - 150 machine has a saw shaft electric motor with a power of 45 kW.
Machines of the TsMD - 150 series cut two - edged beams up to 150 mm high. Up to 10 circular saws with a diameter of up to 500 mm can be installed on the machines. When sawing timber of a lower height, you can use saws of a smaller diameter - this allows you to reduce the width of the cut and, therefore, increase the percentage yield of finished lumber. The saws have a speed of 2850 rpm. , which ensures the high quality of the resulting material.
The feed rate of the material is continuously adjustable. Depending on the load on the saws, according to the readings of the ammeter, the optimal feed rate is set. This allows you to achieve such an operating mode in which the electric motor and saws work without overload in the optimal mode. As a result, the service life of the saws is extended and maintenance costs are reduced.
The gang saw can work together with a log saw to form a single production line, or independently as a second row machine.
The simple and reliable design of the TsMD - 150 machines allows you to work on them for a long time, with a consistently high quality of the products.
Type of supply current | variable three - phase |
Current frequency, Hz | fifty |
Used voltage, V | 380 |
Material Width
|
580 ten |
Material thickness
|
150 fifty |
Length of processed material, mm, not less than | 1000 |
Cutting speed, m/s, not less than | 74 |
Rated feed rate, m/min | 4, 6, 9 |
Number of saws, pcs. , no more | 12 |
Distance between edge saws, mm, no more | 430 |
Saw diameter, mm, maximum | 500/630 |
Nominal diameter of the landing neck for the tool, mm | fifty |
Nominal distance from the floor to the working surface of the table, mm | 910 |
Service rate, people | 2 |
Worm gear | Ch - 80 - 40 - 51 - U2 |
Number of electric motors, pcs | 2 |
Electric motor of the main drive (saw shaft) rated power, kW | 45 |
Rated speed, rpm | 2850 |
Feed drive motor (feeding rows):
|
0.55 1450 |
Total power of electric motors, kW * AT SAW DIAMETER 500 | 45, 55 |
Weight, kg | 1600 |
Machine dimensions
|
1700 1300 1650 |