(View map)
- BrandKazstanex
- Country of manufactureKazakhstan
Log length: 2000-9000 mm of Max diameter: 180-500 mm Diameter otsilindr. logs: 180-340 mm Power of engines: 0,75/0,75/5,5/11 kW
APPOINTMENT:
-
- roundup of a log to the necessary sizes
- selection of longitudinal grooves
- selection of docking cross grooves (cups)
- milling of figured elements (option)
-
-
SCOPE:
It is widely applied in large and medium-sized enterprises to receiving high-quality details of log houses with various dimensions and parameters.
-
-
SCHEME OF PROCESSING
-
- draft and fair roundup
- selection of a longitudinal groove
- selection of the first cup
-
EXAMPLES OF THE RECEIVED PRODUCTS
-
-
DESIGN FEATURES
-
The BED the Massive welded bed of the machine represents a strong and wearproof design steady against deformation and considerable vibration, provides reliable basing of all knots and units. The bed is made on the modern high-precision equipment.
-
The CONTROL PANEL Conveniently located control panel allows the operator to operate the main processing and control, is equipped with the button of an emergency stop of the machine for safe work. The panel possesses long service life, has such advantages as: • - the big buttons allowing to perform work in gloves. • - a possibility of use in any conditions of environment • - high switching ability
-
The LOG CLIP DEVICE the Clip of a log is carried out by means of the high-precision centers established the friend on against the friend with a hydroclip for reliable basing of a log, excluding emergence of vibration during processing. Clips with ease maintain the considerable weight of a log. Such system is most effective for severe conditions of operation.
-
The HYDRAULIC The Mechanized Raising and Installation of Log SYSTEM in a zone of processing is carried out by means of hydraulic system. The design of system is simple and reliable in work, is calculated on severe conditions of operation. The main knots of system are well adapted to work at subzero temperatures (to-27 gr.) also do not demand continuous service.
-
The MILL FOR SELECTION of LONGITUDINAL PAZ the mill Established on a shaft with thick knives allows to choose with ease a longitudinal groove on all length of a log for one pass. The design of a head of a mill excludes a departure of knives that is very important in work. Milling knives easily change and do not demand the special tool for sharpening.
-
The MILL FOR SELECTION of the CUP the Mill passed special turning that excludes emergence of vibration and has the increased operation term. The thick knives from tool steel designed and ground definitely can easily be adjusted on necessary radius. The mill has such features as: • - ease in settings for the necessary radius • - the increased wear resistance of knives • - does not demand expensive tool-grinding equipment
-
The LOG PODYOM HYDRAULIC DEVICE On the RoundMac machine, unlike many machines, in a basic complete set there are two independent gidropodyyomnik for fast installation of a log
-
The SCRAPER CONVEYOR FOR WASTE DISPOSAL In a basic complete set the machine is equipped with the scraper conveyor, rubber scrapers are used that excludes excess noise. The conveyor is used for continuous removal of shaving and sawdust from a processing zone, thereby facilitating further work and reducing idle times.
-
The DEVICE FOR DEDUCTION of the LOG - "-the LUNETTE" - In a basic complete set of the machine it is delivered "-a lunette" - – this device allows to hold a log during processing and does not allow it to sag, thereby allows to receive better production, and also to reduce the removed layer and to respectively increase a tool resource
-
The TOOL In a basic complete set is delivered a necessary set of knives and mills for processing of diameter of logs from the 220-240th
-
WORK IN WINTER CONDITIONS the Machine was specially developed for a possibility of work in severe winter conditions, the Machine can be used at a temperature up to-27 With, at the same time in a hydraulic system seasonal oil is used, and the drive of the milling block is replaced with the electric motor that provides smooth, without breakthroughs, giving.
-
-
ADDITIONAL EQUIPMENT
-
MILLING KNOT FOR RECEIVING FIGURED ELEMENTS (THE OPTION
-
This device is necessary for receiving figured ornaments of a log. These logs are used as decorative columns and racks at construction of arbors, houses etc. The market value of this production is very big as generally this operation is performed manually. This knot has no analogs in Russia.
-
-
Technical characteristics: | |||||||||
Diameter of the rounded log, mm |
100-340 |
||||||||
Maximum diameter of preparation, mm |
100-500 |
||||||||
Length of a log, mm |
2000-9000 |
||||||||
Turning thickness for one cycle of, at most, a mm |
70 |
||||||||
Speed of giving, m/min |
0-40 |
||||||||
Speed of an otsilindrovyvaniye, m/min |
2-3 |
||||||||
Productivity, rm. change |
150 * |
||||||||
Electric motors: - - - motor of a mill, kW / obor. - - - motor of a mill, kW / obor. - - - motor of rotation of a log, kW / obor. - - - motor of giving of kW / obor |
11 kW / 3000 5,5 kW / 3000 0,75 kW / 0-50 0,75 kW / 0-40 |
||||||||
Length of the machine, mm |
11400 |
||||||||
Width, mm |
1400 |
||||||||
Height, mm |
2600 |
||||||||
Weight, kg |
3800 |
-
-
Technical characteristics: | |||||||||
Diameter of the rounded log, mm |
100-340 |
||||||||
Maximum diameter of preparation, mm |
100-500 |
||||||||
Length of a log, mm |
2000-9000 |
||||||||
Turning thickness for one cycle of, at most, a mm |
70 |
||||||||
Speed of giving, m/min |
0-40 |
||||||||
Speed of an otsilindrovyvaniye, m/min |
2-3 |
||||||||
Productivity, rm. change |
150 * |
||||||||
Electric motors: - - - motor of a mill, kW / obor. - - - motor of a mill, kW / obor. - - - motor of rotation of a log, kW / obor. - - - motor of giving of kW / obor |
11 kW / 3000 5,5 kW / 3000 0,75 kW / 0-50 0,75 kW / 0-40 |
||||||||
Length of the machine, mm |
11400 |
||||||||
Width, mm |
1400 |
||||||||
Height, mm |
2600 |
||||||||
Weight, kg |
3800 |
-
-
-
-