Painting covering on a basic layer of W
- Customer pickup,
- Courier
- In detail
- Country of manufactureKazakhstan
"Painting covering on a basic layer of W"
Application: For receiving the coverings of a floor maintaining mechanical influences of considerable intensity at the movement of wheel transport on rubber and plastic to the course, pedestrians and carts on rubber and plastic to the course, and also chemical influences of water, fuels and lubricants, the diluted acids and alkalis of big intensity.
Levels the basis.
| № | Operation | Material | Expense
kg/sq.m |
Tool,
way |
| 1. | Primer |
Ризопокс™ - 1301W
+ 25-65% of water |
0.2 ¸ 0.3
The expense is specified without water |
Roller
with a length of pile of 8-12 mm. |
| Powder | The calcinated quartz sand, fraction
0,4 ¸ 0,8mm or 0,8 ¸ 1,4mm |
0.3 ¸ 0.4 | Manually
Amount of sand on powder depends on the chosen fraction sand. At the choice of large fractions it is necessary to appoint the maximum expense. |
|
| 2. | Basic layer | Ризопокс™ - 3405W | 0.8 ¸ 1.0
1.2 ¸ 1.4 |
Trovel without teeths or the metal pallet. Drawing by method "on sdir". The expense of structure depends on sand which was applied at a stage No. 1.
Expenses correspond to fractions of sand: 0.4 ¸ 0.8mm 0.8 ¸ 1.4mm |
| The calcinated quartz sand, fraction 0.1-0.4mm | 0.3 ¸ 0.4 | It is added at
mixing of components only when using sand fr. 0.8 ¸ 1.4mm at a stage No. 1. |
||
| Filling | The calcinated quartz sand, fraction
0.1-0.4mm or 0.4-0.8mmil 0.8-1.4mm |
2.5 ¸ 3.0
3.0 ¸3.5 3.5 ¸ 4.5 (depending on fraction of sand at a stage No. 1) |
Manually.
To degree "under a fur coat" with education on a surface of a layer of dry free sand. At the choice of bigger fraction it is necessary to appoint a bigger consumption of sand for filling of a layer to powder (stage No. 1) "under a fur coat" (stage No. 2). |
|
| 3. | Cleaning and
preparation surfaces |
Sweep away excess sand.
To grind a surface the grinder with diamond elements. To remove dust the industrial vacuum cleaner. |
||
| 4. | Zapechatka |
Ризопокс™ - 1301W
+ 25% of water |
0.15 ¸ 0.25
The expense is specified without water |
The roller resistant with a pile length the 8-12th.
Expense depending on fraction of sand for filling at a stage No. 2. |
| 5. | Front layer |
Ризопокс™ - 5601W
10% of water |
2-3sloya till 0:15 ¸ 0.2
The expense is specified without water |
The roller resistant with a pile length the 8-12th.
Expense depending on fraction of sand for filling at a stage No. 2. |
| TOTAL | ||||
General thickness: 1.2 ¸ 2.3 mm
Notes:
¹ - the total thickness of a covering depends on extent of polishing at a stage No. 3.
² - at flatness of the basis to a lath sand of fraction 0.4-0.8mm for powder at a stage No. 1 is not recommended to use more than 4 mm by 2 m.
After polishing of a basic layer it is obligatory to make dust removal and a primer of a surface. At the same time the expense of a primer makes 0.15 ¸ 0.25 kg / m.kv. (depending on fraction of quartz sand in filling of a basic layer and extent of polishing) the sealing structure is recommended to be applied on very porous surface in two layers. The zapechatka of a time "on sdir" by means of the metal pallet is also possible: after the minimum priming of Rizopoks-1301W (0,15 kg / m.kv.) 0,25 - 0,35 kg / m.kv are applied. structure Rizopoks-3405W.